Genuine Honda Del Sol Clutch Slave Cylinder

Enter your vehicle info to find more parts and verify fitment

  • Select Vehicle by VIN
  • Select Vehicle by Model
Select by VIN
Enter your VIN for the most accurate results.
Enter your VIN for the most accurate results.
or
Select by Model
-- Select Model --
-- Select Year --
-- Select Body & Trim --
-- Select Emission & Transmission --

1 Clutch Slave Cylinder found

  • Honda Del Sol Clutch Slave Cylinder - 46930-SR3-013
    Diagram for Honda Del Sol Clutch Slave Cylinder - 46930-SR3-013
    View related parts

    Honda Del Sol Cylinder Assembly, Slave

    Part Number: 46930-SR3-013
    • Other Name: Slave Cylinder
    $117.33 MSRP: $167.14
    You Save: $49.81 (30%)
    Add to Cart
    More Info
    Fits the following Vehicles:
    • 1993-1997 Honda Del Sol | 2 Door S, 2 Door SI, 2 Door V-TEC | KA 5MT, KL 5MT
    Less Info

Honda Del Sol Clutch Slave Cylinder Parts Questions & Answers

  • Q: How to remove and install a Clutch Release Cylinder?
    A: Disconnect the negative cable from the battery, ensuring you have the correct activation code if your radio is equipped with an anti-theft system. Raise the vehicle and support it securely on jackstands. Disconnect the fluid hose at the slave cylinder using a flare nut wrench to avoid stripping the corners off the fitting. Be prepared for some fluid spillage. Remove the two slave cylinder mounting bolts and then the slave cylinder itself. To install, place the slave cylinder on the clutch housing without fully tightening the bolts, ensuring the pushrod is seated in the release fork pocket. Connect the hydraulic line to the slave cylinder and then tighten the slave cylinder mounting bolts securely. Fill the Clutch Master Cylinder with brake fluid conforming to DOT 3 specifications. Bleed the system, lower the vehicle and reconnect the negative battery cable.

Related Honda Del Sol Parts