How Can I Replace the Driveaxle Oil Seals?

Wheel seal leaks often occur due to worn wheel seals. Raise the vehicle and support it securely on jackstands. Remove the driveaxles and pry the wheel seal out. Use a special wheel seal removal tool if needed. Install the new seal with a large socket or pipe. Drive it squarely into the bore and coat the seal lip with lubricant. Install the driveaxle(s) carefully.

Genuine Honda Del Sol Wheel Seal

Wheel Axle Seal

Enter your vehicle info to find more parts and verify fitment

Select Vehicle by VIN
Select Vehicle by Model

Select by VIN

Enter your VIN for the most accurate results.

Select by Model

-- Select Model --

-- Select Year --

-- Select Body & Trim --

-- Select Emission & Transmission --

2 Wheel Seals found

View related parts
Honda Del Sol Ring, Front Knuckle
Part Number: 44348-SR3-000
- Other Name: Wheel Bearing Dust Shield; Wheel Bearing Seal
- Position: Front
$6.83 MSRP: $9.65
You Save: $2.82 (30%)

Add to Cart
More Info
Fits the following Vehicles:
1993-1995 Honda Del Sol | 2 Door S, 2 Door SI, 2 Door V-TEC | KA 4AT, KA 5MT, KL 4AT, KL 5MT
Less Info
View related parts
Honda Del Sol Ring, L. Spindle
Part Number: 42412-SB2-020
- Other Name: Hub & Bearing Ring; Ring
More Info
Fits the following Vehicles:
1993-1995 Honda Del Sol | 2 Door S | KA 4AT, KA 5MT, KL 4AT, KL 5MT
Less Info

Honda Del Sol Wheel Seal Parts Questions & Answers

Ring, Front Knuckle
44348-SR3-000
Q: How Can I Replace the Driveaxle Oil Seals?
A: Wheel seal leaks often occur due to worn wheel seals. Raise the vehicle and support it securely on jackstands. Remove the driveaxles and pry the wheel seal out. Use a special wheel seal removal tool if needed. Install the new seal with a large socket or pipe. Drive it squarely into the bore and coat the seal lip with lubricant. Install the driveaxle(s) carefully.