Q: How do you replace the Intake Manifold Temperature Sensor and Mass Air Flow Sensor on Honda Fit?
A: In the models produced in 2007 and 2008 the Intake Manifold Temperature Sensor is fixed on the back of the air filter housing. First, you need to unscrew the electrical connector from the Intake Manifold Temperature Sensor and then take out the sensor from the grommet that is averagely fixed in the air filter housing. Examine the grommet material for signs of cracking or wearing down, and if such is the case replace it, the installation is a process that will just be a reverse of removal. For the vehicles that have been produced after 2009, the MAF/Intake Manifold Temperature Sensor is fitted on the upper part of the air filter housing. The first step is to remove the electrical connector of MAF/Intake Manifold Temperature Sensor with the help of a snap. The second step includes the removal of two screws-the sensor is mounted on the air filter housing. Eliminate any signs of wear on the MAF/Intake Manifold Temperature Sensor gasket, and if so perform replacement and ensure installation is done in a reverse manner and make sure to use new gasket securing the screws tightly.