How to replace a Wheel Cylinder?

If replacement is warranted, usually because of fluid leakage or sticky operation, explore all options before beginning the job. New wheel cylinders are available, which makes this job quite easy. Never replace only one wheel cylinder. Always replace both of them at the same time. To remove, first remove the rear brake shoes. Using a flare-nut wrench, if available, disconnect the brake line fitting from the wheel cylinder. To detach the wheel cylinder from the brake backing plate, disconnect the brake line fitting, then remove the wheel cylinder bolts. Plug the end of the brake line to prevent fluid loss and contamination. Remove the two bolts securing the wheel cylinder to the backing plate and remove the wheel cylinder. Installation is the reverse of removal. Tighten the wheel cylinder mounting bolts and line fitting securely. Install the brake shoes and brake drum. Bleed the brakes. Carefully test the brakes before resuming normal operation.

Genuine Honda Fit Wheel Cylinder

Brake Wheel Cylinder

Enter your vehicle info to find more parts and verify fitment

Select Vehicle by VIN
Select Vehicle by Model

Select by VIN

Enter your VIN for the most accurate results.

Select by Model

-- Select Model --

-- Select Year --

-- Select Body & Trim --

-- Select Emission & Transmission --

5 Wheel Cylinders found

View related parts
Honda Fit Cylinder Assembly, Rear Wheel
Part Number: 43300-SNA-A01
- Other Name: Wheel Cylinder
- Position: Rear
$38.35 MSRP: $54.17
You Save: $15.82 (30%)

Add to Cart
More Info
Fits the following Vehicles:
2009-2013 Honda Fit | 5 Door FIT, 5 Door Sport | KA 5AT, KA 5MT
Less Info
View related parts
Honda Fit Cylinder Assembly, Rear Wheel (B)
Part Number: 43301-SCK-003
- Other Name: Wheel Cylinder
- Position: Rear
$57.73 MSRP: $81.53
You Save: $23.80 (30%)

Add to Cart
More Info
Fits the following Vehicles:
2007-2008 Honda Fit | 5 Door Base, 5 Door Sport | KA 5AT, KA 5MT
Less Info
View related parts
Honda Fit Cylinder Assembly, Rear Wheel (A)
Part Number: 43300-SCK-003
- Other Name: Wheel Cylinder
- Position: Rear
$57.73 MSRP: $81.53
You Save: $23.80 (30%)

Add to Cart
More Info
Fits the following Vehicles:
2007-2008 Honda Fit | 5 Door Base, 5 Door Sport | KA 5AT, KA 5MT
Less Info
View related parts
Honda Fit Cylinder Assembly, Rear Wheel
Part Number: 43300-T5R-A01
- Other Name: Wheel Cylinder
- Position: Rear
$43.92 MSRP: $62.03
You Save: $18.11 (30%)

Add to Cart
More Info
Fits the following Vehicles:
2015-2020 Honda Fit | 5 Door EX, 5 Door EX-L, 5 Door EX-LN, 5 Door LX, 5 Door LX SE, 5 Door Sport | KA 6MT, KA CVT
Less Info
View related parts
Honda Fit Cylinder Set, Rear Wheel
Part Number: 01433-T5R-A00
- Other Name: Wheel Cylinder Overhaul Kit
- Position: Rear
$8.78 MSRP: $12.41
You Save: $3.63 (30%)

Add to Cart
More Info
Fits the following Vehicles:
2015-2020 Honda Fit | 5 Door EX, 5 Door EX-L, 5 Door EX-LN, 5 Door LX, 5 Door LX SE, 5 Door Sport | KA 6MT, KA CVT
Less Info

Honda Fit Wheel Cylinder Parts Questions & Answers

Cylinder Assembly, Rear Wheel (A)
43300-SCK-003
Q: How to replace a Wheel Cylinder?
A: If replacement is warranted, usually because of fluid leakage or sticky operation, explore all options before beginning the job. New wheel cylinders are available, which makes this job quite easy. Never replace only one wheel cylinder. Always replace both of them at the same time. To remove, first remove the rear brake shoes. Using a flare-nut wrench, if available, disconnect the Brake Line fitting from the wheel cylinder. To detach the wheel cylinder from the brake backing plate, disconnect the brake line fitting, then remove the wheel cylinder bolts. Plug the end of the brake line to prevent fluid loss and contamination. Remove the two bolts securing the wheel cylinder to the backing plate and remove the wheel cylinder. Installation is the reverse of removal. Tighten the wheel cylinder mounting bolts and line fitting securely. Install the brake shoes and brake drum. Bleed the brakes. Carefully test the brakes before resuming normal operation.