Genuine Honda Pilot Brake Master Cylinder

Enter your vehicle info to find more parts and verify fitment

  • Select Vehicle by VIN
  • Select Vehicle by Model
Select by VIN
Enter your VIN for the most accurate results.
Enter your VIN for the most accurate results.
or
Select by Model
-- Select Model --
-- Select Year --
-- Select Body & Trim --
-- Select Emission & Transmission --

4 Brake Master Cylinders found

  • Honda Pilot Brake Master Cylinder - 46100-SZA-A02
    Diagram for Honda Pilot Brake Master Cylinder - 46100-SZA-A02
    View related parts

    Honda Pilot Master Cylinder

    Part Number: 46100-SZA-A02
    • Replaces: 46100-SZA-A01
    $195.03 MSRP: $277.82
    You Save: $82.79 (30%)
    Add to Cart
    More Info
    Fits the following Vehicles:
    • 2009-2015 Honda Pilot | 5 Door EX (2WD), 5 Door EX (4WD), 5 Door EX 4.4 (4WD), 5 Door EX-L (2WD), 5 Door EX-L (4WD), 5 Door LX (2WD), 5 Door LX (4WD), 5 Door LX 4.2 (4WD), 5 Door SE (2WD), 5 Door SE (4WD), 5 Door Touring (2WD), 5 Door Touring (4WD) | KA 5AT
    Less Info
  • Honda Pilot Brake Master Cylinder - 46100-TP6-A12
    Diagram for Honda Pilot Brake Master Cylinder - 46100-TP6-A12
    View related parts

    Honda Pilot Master Cylinder Assembly

    Part Number: 46100-TP6-A12
    • Other Name: Master Cylinder
    • Replaces: 46100-TP6-A11
    $318.12 MSRP: $453.16
    You Save: $135.04 (30%)
    Add to Cart
    More Info
    Fits the following Vehicles:
    • 2016-2021 Honda Pilot | 5 Door Black (AWD), 5 Door ELITE (AWD), 5 Door EX (2WD), 5 Door EX (AWD), 5 Door EX-L (2WD), 5 Door EX-L (AWD), 5 Door LX (2WD), 5 Door LX (AWD), 5 Door SE (2WD), 5 Door SE (AWD), 5 Door Touring (2WD), 5 Door Touring (AWD) | KA 6AT, KA 9AT
    Less Info
  • Honda Pilot Brake Master Cylinder - 46100-S3V-A11
    Diagram for Honda Pilot Brake Master Cylinder - 46100-S3V-A11
    View related parts

    Honda Pilot Master Cylinder Assembly

    Part Number: 46100-S3V-A11
    • Other Name: Master Cylinder
    $355.40 MSRP: $506.27
    You Save: $150.87 (30%)
    Add to Cart
    More Info
    Fits the following Vehicles:
    • 2005-2008 Honda Pilot | 5 Door EX (2WD), 5 Door EX (4WD), 5 Door EX-L, 5 Door EX-L (2WD), 5 Door EX-L (4WD), 5 Door EX-SE (2WD), 5 Door EX-SE (4WD), 5 Door LX (2WD), 5 Door LX (4WD), 5 Door LX-VP (2WD), 5 Door LX-VP (4WD) | KA 5AT
    Less Info
  • Honda Pilot Brake Master Cylinder - 46110-S0X-003
    Diagram for Honda Pilot Brake Master Cylinder - 46110-S0X-003
    View related parts

    Honda Pilot Cylinder

    Part Number: 46110-S0X-003
    • Other Name: Master Cylinder
    $206.17 MSRP: $293.70
    You Save: $87.53 (30%)
    Add to Cart
    More Info
    Fits the following Vehicles:
    • 2003-2005 Honda Pilot | 5 Door EX, 5 Door EX-L, 5 Door LX | KA 5AT, KL 5AT
    Less Info

Honda Pilot Brake Master Cylinder Parts Questions & Answers

  • Q: How to replace the master cylinder in Honda Pilot?
    A: For the HONDA PILOT/RIDGELINE and 2006 and earlier ACURA MDX models, start by removing the air intake duct. Disconnect the electrical connectors for the fluid level sensor and siphon as much fluid as possible from the reservoir using a syringe, like an old turkey baster. Place rags under the fluid fittings and have caps or plastic bags ready to cover the line ends once disconnected. Brake fluid can damage paint, so exercise caution during this procedure. Using a flare nut wrench, loosen the fittings at the Brake Line ends where they connect to the brake master cylinder. After slightly pulling away the brake lines from the brake master cylinder, plug their ends to prevent contamination. Next, remove the brake master cylinder mounting nuts and take out the brake master cylinder from the engine compartment, ensuring no fluid spills. If installing a new brake master cylinder, transfer the reservoir to the new brake master cylinder and use new seals. For the installation, first bench bleed the new brake master cylinder. Mount it in a vise, attach bleeder tubes to the outlet ports, and fill the reservoir with the recommended brake fluid. Push the pistons into the brake master cylinder to expel air, repeating until no air bubbles remain. Remove bleed tubes, plug the open ports, and cap the reservoir. Place the brake master cylinder over the power brake booster studs, tightening the attaching nuts finger tight. Install a new O-ring into the sleeve, thread brake line fittings into the brake master cylinder, fully tighten the mounting nuts and then the brake line fittings. Refill the brake master cylinder reservoir, bleed it, and the brake system. Reinstall the air intake duct and, if necessary, reattach and adjust the accelerator and cruise control cables. Test the brake system operation before regular use. For the 2007 ACURA MDX models, the power brake booster pushrod length must be checked and adjusted for proper brake master cylinder installation. Due to the recessed pushrod in the booster, special tools are needed, and it's advised to tow the vehicle to a qualified dealer service department or repair shop for brake master cylinder replacement.

About Honda Pilot Brake Master Cylinder

A Honda Pilot needs to be kept in good working condition in your vehicle. The online catalog we provide will get you through the ordering process safely and securely. All genuine Honda Brake Master Cylinders from us are shipped directly from authorized Honda Dealer. If you want search for Honda Brake Master Cylinder fast and easily, just come to Hondapartsnow.com to look for your parts.