Honda 06312-5G0-505RM STARTER, CORE ID (SM-74011)

You can Select Your Vehicle to check if 06312-5G0-505RM fits your vehicle.

If a malfunction occurs in the starling circuit, first check the battery cable clamps, condition of the battery cables, condition of the battery, starter solenoid wiring and connections, starter mounting bolts, fuses in the engine compartment fuse and relay box, operation of the gear position switch or clutch start switch circuit, operation of the starter cut relay. If the starter does not activate when the ignition switch is turned to the start position, check for battery voltage to the solenoid. If the starter turns over slowly, check the starter cranking voltage and the current draw from the battery. If the starter is receiving voltage but does not activate, remove and check the starter/ solenoid assembly on the bench. With the starter/ solenoid assembly mounted in a vise on the bench, install one jumper cable from the negative terminal to the body of the starter and another jumper cable from the positive terminal on the battery to the B+ terminal on the starter. Install a starter switch and apply battery voltage to the solenoid S terminal and observe the solenoid plunger, shift lever and overrunning clutch extend and rotate the pinion drive.

Reconnect the cable to the negative terminal of the battery.

This is a Remanufactured part.