Honda 78100-SH3-A04 Combination Meter Assembly (Denso)

For the CRX 1984-87, it is necessary to remove screws and claws of the lower dash panel and the entire lower panel and finally, the screw of the lower heater control knob and the heater control mount. Remove the wire connectors, and then the instrument panel as well as screws that hold it, and then raise the gauge assembly after disconnecting the wire connectors. Our cover-up is suitable for 1984-87 Civic Hatchback as well as Sedan; uninstall the upper instrument panels caps and screws and pull out the gauge assembly to sever the wire connectors and the speedometer cable. In the 1984-87 Civic Wagon, first, get at the instrument panel retaining bolts after removing the dashboard lower panel screws, the wiring connectors, and the speedometer cable along with the gauge assembly are disconnected lastly before detaching the instrument panel with the gauge assembly. On the 1988-91 Civic Hatchback and Sedan remove the negative battery cable and then remove the cap and screw from the instrument housing then pull the surround panel and instrument cluster, then while doing so you have to disconnected the speedometer cable and the electrical connections. Last but not the least, the 1988-91 Civic Wagon and CRX, detaching the negative terminal, removing the instrument cluster surround cover and screw, pulling the surround upward and taking the electrical leads out before extracting the instrument cluster. In reinstalling for all models, the procedure involves the following process: With particular emphasize on each connection to ensure that they are well secured.