Some important procedures which should be undertaken before removing and overhauling or altering an engine are, One must first go through all of the removal and installation instructions before carrying out the work. The choice of a proper working place is of great significance, as well as the space for the car and for the storage; if it is impossible to rent a station or a garage, a level, clean area of concrete or asphalt is needed. The removal process requires that the engine and transaxle be taken down to the floor and then the vehicle raised enough to remove it, this requires both a vehicle hoist and an engine hoist for the combined weight of the engine and transaxle. Security is very important since the process is dangerous. Maintenance of the engine compartment and engine beforehand prevents the tools from getting mingled up. One person cannot fit a new engine and transaxle assembly or even remove one that is already in the car especially if the person doing the replacement is inexperienced, then it is advisable to hire at least one helper. It is also helpful to consult a person who has knowledge in the removal of the engine as well. Preparation is critical when preparing for an engine swap and this involves the determination of the tools and equipment required include a heavy duty floor jack with a transmission jack head adapter, a complete set of wrenches and sockets, wooden blocks and rags and cleaning solvent in case there is a spillage. Furthermore, expect the car to be off the road for a long time, and visit a machinist to be quoted on how long it takes to overhaul or repair any part that needs help.