How can external engine components be removed more easily when working with an engine on 2015 Honda Civic?

If the engine is mounted on a portable engine stand, the external components are much easier to remove and often it is possible to rent a stand for a few dollars from the equipment rental yard. When the engine is to be mounted on the stand the flywheel/driveplate should be taken out. If a stand is not available then external parts of the engine can be removed but this has to be done when the engine is blocked on the floor and special care has to be taken that the engine does not tilt or drop down. During the procurement of a rebuilt engine, all the peripherals have to be detached from the external components and are used on the new engine; these include clutch and flywheel for manual transaxle models, drive plate for the automatic transaxle, emissions parts, engine support brackets, engine back plate, intake and exhaust manifold, fuel injection systems, oil filter, ignition and spark plugs, thermostat and housing, and water pump. Special care should be taken when uninstalling such parts as remembering the position of gasket, seals, spacers, pins, brackets, washers, bolts, among others is important during assembly. If procuring a short block, the timing chain or belt, cylinder head(s), oil pan, oil pump pick-up tube, oil pump, oil jets and water pump should be removed to turn in the old short block to the rebuilder as core.

Genuine 2015 Honda Civic Engine

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Engines found

View related parts
2015 Honda Civic Cylinder Head
Part Number: 12200-R1A-A00
$893.58 MSRP: $1190.25
You Save: $296.67 (25%)
ADD TO CART
Product Specifications
- Item Weight: 26.80 Pounds
- Item Dimensions: 17.2 x 11.5 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12200-R1A-A00
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following 2015 Honda Civic Submodels:
- 2 Door EX, 2 Door EX-L, 2 Door LX, 4 Door EX, 4 Door EX-L, 4 Door HF, 4 Door LX | KA 5MT, KA CVT, KL CVT
View related parts
2015 Honda Civic General Assy. (DOT)
Part Number: 10002-RX0-A01
$7925.96 MSRP: $10537.82
You Save: $2611.86 (25%)
ADD TO CART
Product Specifications
- Other Name: Short Block
- Replaces: 10002-RX0-X00, 10002-RX0-X01, 10002-RX0-A00
- Item Weight: 132.10 Pounds
- Item Dimensions: 28.8 x 23.7 x 24.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10002-RX0-A01
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
More Info
Fits the following 2015 Honda Civic Submodels:
- 2 Door SI, 4 Door SI | KA 6MT
View related parts
2015 Honda Civic Cylinder Block General Assembly
Part Number: 10002-R1A-U00
$2349.26 MSRP: $3129.22
You Save: $779.96 (25%)
ADD TO CART
Product Specifications
- Other Name: Short Block
- Replaces: 10002-R1A-A00
- Item Weight: 174.40 Pounds
- Item Dimensions: 29.4 x 24.3 x 22.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10002-R1A-U00
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
More Info
Fits the following 2015 Honda Civic Submodels:
- 2 Door EX, 2 Door EX-L, 2 Door LX, 4 Door EX, 4 Door EX-L, 4 Door HF, 4 Door LX | KA 5MT, KA CVT, KL CVT
View related parts
2015 Honda Civic Cylinder Block General Assembly
Part Number: 10002-R1Z-A00
$2648.70 MSRP: $3528.08
You Save: $879.38 (25%)
ADD TO CART
Product Specifications
- Other Name: General Assy., Cylinder Block
- Item Weight: 128.30 Pounds
- Item Dimensions: 28.5 x 23.9 x 23.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10002-R1Z-A00
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
More Info
Fits the following 2015 Honda Civic Submodels:
- 4 Door GX | KA 5AT
View related parts
2015 Honda Civic Cylinder Block General Assembly
Part Number: 10002-RW0-Z01
$7440.75 MSRP: $9911.09
You Save: $2470.34 (25%)
ADD TO CART
Product Specifications
- Other Name: Short Block
- Item Weight: 110.50 Pounds
- Item Dimensions: 31.7 x 29.6 x 20.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10002-RW0-Z01
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
More Info
Fits the following 2015 Honda Civic Submodels:
- 4 Door MX, 4 Door MX (Hybrid) | KA CVT, KL CVT
View related parts
2015 Honda Civic Cylinder Head General
Part Number: 10003-R1B-A01
$7529.14 MSRP: $10009.25
You Save: $2480.11 (25%)
ADD TO CART
Product Specifications
- Other Name: Cylinder Head
- Replaced by: 10003-R1A-A01
- Item Weight: 55.60 Pounds
- Item Dimensions: 26.0 x 14.6 x 12.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10003-R1B-A01
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
More Info
Fits the following 2015 Honda Civic Submodels:
- 2 Door EX, 2 Door EX-L, 2 Door LX, 4 Door EX, 4 Door EX-L, 4 Door HF, 4 Door LX | KA 5MT, KA CVT, KL CVT

2015 Honda Civic Engine

Our website is the optimal online store for when you need any genuine 2015 Honda Civic Engine. We offer a wide range of 2015 Honda Civic Engine at unbeatable prices. We will help provide you with a worry-free shopping experience at highly competitive prices. In addition, all OEM parts are backed by the manufacturer's warranty.

2015 Honda Civic Engine Parts Questions & Experts Answers

Q: How can external engine components be removed more easily when working with an engine on 2015 Honda Civic?
A: If the engine is mounted on a portable engine stand, the external components are much easier to remove and often it is possible to rent a stand for a few dollars from the equipment rental yard. When the engine is to be mounted on the stand the flywheel/driveplate should be taken out. If a stand is not available then external parts of the engine can be removed but this has to be done when the engine is blocked on the floor and special care has to be taken that the engine does not tilt or drop down. During the procurement of a rebuilt engine, all the peripherals have to be detached from the external components and are used on the new engine; these include clutch and flywheel for manual transaxle models, drive plate for the automatic transaxle, emissions parts, engine support brackets, engine back plate, intake and exhaust manifold, fuel injection systems, oil filter, ignition and spark plugs, thermostat and housing, and water pump. Special care should be taken when uninstalling such parts as remembering the position of gasket, seals, spacers, pins, brackets, washers, bolts, among others is important during assembly. If procuring a short block, the timing chain or belt, cylinder head(s), oil pan, oil pump pick-up tube, oil pump, oil jets and water pump should be removed to turn in the old short block to the rebuilder as core.