First, ensure both switches - for
Headlight and ignition - are turned off. After that, open your vehicle's hood. Facing the hood at the front of the vehicle, turn the bulb socket on the right headlight by 45 degrees to remove it, then pull off its electrical connection. Installation is the reverse of removal. Before working on the left-side bulb, take off the upper trim piece on the left side of your car by releasing the fasteners. Then pry out clips to detach the cover and duct above the air intake, so you can access the bulb socket. Turn your bulb socket 45 degrees counterclockwise, then disconnect the electrical connection. After pulling out the air intake duct, you can remove the bulb right away. Installation is the reverse of removal. To take out the high beam bulb, turn the socket at 45 degrees and remove the bulb, followed by disconnecting the electrical cable. Installation is the reverse of removal.