How to remove and reinstall the driveplate and transaxle on Honda Odyssey?

Remove the engine and transaxle, then separate the transaxle from the engine. Remove the bolts that secure the driveplate to the crankshaft. Clean the driveplate and inspect the surface for cracks, checking for worn, cracked, or broken ring-gear teeth. Lay the driveplate on a flat surface and use a straightedge to check for warpage. Clean and inspect the mating surfaces of the driveplate and the crankshaft, replacing the crankshaft oil seal if it is leaking before reinstalling the driveplate. Position the driveplate against the crankshaft, ensuring correct installation with the offset bolt holes. Follow a crisscross pattern to tighten the bolts in several stages to the specified torque. The remainder of installation is the reverse of the removal procedure.

Genuine Honda Odyssey Flywheel

Clutch Flywheel

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Flywheels found

View related parts
Honda Odyssey Plate, Drive
Part Number: 26251-RYE-E00
$32.08 MSRP: $45.32
You Save: $13.24 (30%)
ADD TO CART
Product Specifications
- Other Name: Drive Plate
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2011-2017 Honda Odyssey | 5 Door EX, 5 Door EX-L, 5 Door LX, 5 Door SE, 5 Door Touring | KA 6AT
View related parts
Honda Odyssey Plate, Drive
Part Number: 26251-PAA-000
$50.74 MSRP: $89.20
You Save: $38.46 (44%)
ADD TO CART
Product Specifications
- Other Name: Drive Plate
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1998 Honda Odyssey | 5 Door EX, 5 Door LX (6 Seats), 5 Door LX (7 Seats) | KA 4AT
View related parts
Honda Odyssey Plate, Drive
Part Number: 26250-5J4-000
$203.69 MSRP: $290.15
You Save: $86.46 (30%)
ADD TO CART
Product Specifications
- Other Name: Drive Plate
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2018-2019 Honda Odyssey | 5 Door EX, 5 Door EX-L, 5 Door LX | KA 9AT
View related parts
Honda Odyssey Plate, Drive
Part Number: 26251-P8F-000
$64.14 MSRP: $90.60
You Save: $26.46 (30%)
ADD TO CART
Product Specifications
- Other Name: Drive Plate
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1999-2006 Honda Odyssey | 5 Door EX, 5 Door EX-L, 5 Door EXL-T, 5 Door LX, 5 Door VAN | KA 4AT, KA 5AT
View related parts
Honda Odyssey Plate, Drive
Part Number: 26251-RDJ-000
$62.82 MSRP: $88.73
You Save: $25.91 (30%)
ADD TO CART
Product Specifications
- Other Name: Drive Plate
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2007-2013 Honda Odyssey | 5 Door EX, 5 Door EX-L, 5 Door EXL-T, 5 Door LX | KA 5AT
View related parts
Honda Odyssey Plate, Drive
Part Number: 26250-5MX-A00
$112.41 MSRP: $158.77
You Save: $46.36 (30%)
ADD TO CART
Product Specifications
- Other Name: Drive Plate
- Replaced by: 26250-6T2-000
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2018-2023 Honda Odyssey | 5 Door ELITE (10AT), 5 Door EX, 5 Door EX (10AT), 5 Door EX-L, 5 Door EX-L (10AT), 5 Door Elite, 5 Door LX (10AT), 5 Door Sport, 5 Door Touring, 5 Door Touring (10AT) | 10AT, KA XAT
View related parts
Honda Odyssey Plate, Drive
Part Number: 26251-PT2-901
Product Specifications
- Other Name: Drive Plate
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1995-1997 Honda Odyssey | 5 Door EX, 5 Door LX (6 Seats), 5 Door LX (7 Seats) | KA 4AT

Honda Odyssey Flywheel

Honda Odyssey vehicles use the Flywheel as a storage mechanism for rotational power that ensures consistent engine performance and also as an interface between the starter drive and crankshaft for ignition initiation and as a stable lubricating zone for the clutch disc. The two types of Flywheel include solid Flywheel and dual mass Flywheel (DMFs). Electric Flywheel represent a basic design yet dual mass Flywheel integrate a damping unit with elastic components to both improve power delivery and minimize motor sounds. Wear of clutch contact surfaces leads to replacement demands for the Flywheel especially when either substantial scoring or warpage is detected. The need for clutch repair generally requires disc replacement because DMFs do not allow surface restoration. The operations of a system part get affected when the ring gear sustains damage which either demands new assets for the replacement unit itself or replacement of its ring gear component. Additionally the Honda Odyssey replacement part acts as an essential system because it ensures both steady engine functions and appropriate clutch performance in the Honda Odyssey vehicles.

In search of affordable OEM Honda Odyssey Flywheel? Consider browsing through our extensive inventory of genuine Honda Odyssey Flywheel. Not only do we provide market-leading prices and a manufacturer's warranty, but we also pride ourselves on exceptional customer service and swift delivery.

Honda Odyssey Flywheel Parts Questions & Experts Answers

Plate, Drive
26251-P8F-000
Q: How to remove and reinstall the driveplate and transaxle on Honda Odyssey?
A:
Remove the engine and transaxle, then separate the transaxle from the engine. Remove the bolts that secure the driveplate to the crankshaft. Clean the driveplate and inspect the surface for cracks, checking for worn, cracked, or broken ring-gear teeth. Lay the driveplate on a flat surface and use a straightedge to check for warpage. Clean and inspect the mating surfaces of the driveplate and the crankshaft, replacing the crankshaft oil seal if it is leaking before reinstalling the driveplate. Position the driveplate against the crankshaft, ensuring correct installation with the offset bolt holes. Follow a crisscross pattern to tighten the bolts in several stages to the specified torque. The remainder of installation is the reverse of the removal procedure.