How to remove and install Fuel Injectors and Fuel Rail on a Honda Odyssey?

Relieve fuel pressure, disconnect battery cable, remove intake manifold cover and upper intake manifold. Disconnect electrical connectors from fuel injectors. For 2001 models, disconnect vacuum hose and fuel return hose from fuel pressure regulator, and fuel supply hose from front fuel rail. For 2002 and later models, disconnect crossover hose from fuel rails or fuel hose from junction block. Remove fuel rail and injectors as one unit. Remove seal ring from each injector bore in cylinder head. Lubricate new cushion rings and O-rings with engine oil, insert fuel strainer into top of each injector, attach lower O-rings. Place injectors into fuel rail, lubricate new seal rings with engine oil, press into injector bore in intake manifold. Set injectors and fuel rail assembly on intake manifold, tighten fuel rail bolts. Reconnect battery cable, activate ignition switch to ON, inspect for leaks.

Genuine Honda Odyssey Fuel Injector

Gas Injector

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Fuel Injectors found

View related parts
Honda Odyssey Injector Set, Fuel
Part Number: 16010-RLV-315
$246.87 MSRP: $351.67
You Save: $104.80 (30%)
ADD TO CART
Product Specifications
- Other Name: Injector
- Replaces: 16010-RLV-305
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2018-2019 Honda Odyssey | 5 Door ELITE (10AT), 5 Door EX, 5 Door EX-L, 5 Door LX, 5 Door Touring (10AT) | KA 9AT, KA XAT
View related parts
Honda Odyssey Injector Assembly, Fuel
Part Number: 16450-RCA-A01
$98.03 MSRP: $138.47
You Save: $40.44 (30%)
ADD TO CART
Product Specifications
- Other Name: Injector
- Replaces: 16450-RGL-A01
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2005-2017 Honda Odyssey | 5 Door EX, 5 Door EX-L, 5 Door EXL-T, 5 Door LX, 5 Door SE, 5 Door Touring | KA 5AT, KA 6AT
View related parts
Honda Odyssey Injector Set, Fuel
Part Number: 06164-P8E-A00
$118.78 MSRP: $169.20
You Save: $50.42 (30%)
ADD TO CART
Product Specifications
- Other Name: Injector
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2002-2004 Honda Odyssey | 5 Door EX, 5 Door EX-L, 5 Door LX, 5 Door VAN | KA 5AT
View related parts
Honda Odyssey Injector Set, Fuel
Part Number: 06164-P8F-A00
$190.02 MSRP: $270.68
You Save: $80.66 (30%)
ADD TO CART
Product Specifications
- Other Name: Injector
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1999-2001 Honda Odyssey | 5 Door EX, 5 Door LX, 5 Door VAN | KA 4AT
View related parts
Honda Odyssey INJECTOR SET, FUEL
Part Number: 16010-RLV-306
$509.05 MSRP: $757.52
You Save: $248.47 (33%)
ADD TO CART
Product Specifications
- Other Name: Injector
- Replaced by: 06160-RLV-306
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2020-2022 Honda Odyssey | 5 Door ELITE (10AT), 5 Door EX (10AT), 5 Door EX-L (10AT), 5 Door LX (10AT), 5 Door Touring (10AT) | KA XAT
View related parts
Honda Odyssey Injector Set, Fuel
Part Number: 06164-P2J-000
$341.38 MSRP: $486.30
You Save: $144.92 (30%)
Product Specifications
- Other Name: Injector
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1998 Honda Odyssey | 5 Door EX, 5 Door LX (6 Seats), 5 Door LX (7 Seats) | KA 4AT
View related parts
Honda Odyssey Injector Set, Fuel
Part Number: 06164-P0A-000
Product Specifications
- Other Name: Injector
- Replaces: 06164-PH6-000, 06164-PL2-L00, 06164-PT3-A00, 16450-PH7-661, 16450-PH7-660, 16450-PP8-000, 16450-PH7-015, 16450-PJ0-683
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1995-1997 Honda Odyssey | 5 Door EX, 5 Door LX (6 Seats), 5 Door LX (7 Seats) | KA 4AT

Honda Odyssey Fuel Injector

The Fuel Injector on the Honda Odyssey is the electronic substitute to the carburetor that pumps fuel directly into the engine cylinders with precision dictated by the engine control unit. This system guarantees the correct proportion of air and fuel required by the engine and this is based on the load of the engine at any given moment in time. Faulty injectors often result to things like poor idle, low power and mileage, due to which it requires replacement for a proper fix. The type of fuel injectors for Honda Odyssey changed with the years, the most recent model using the so-called "returnless" system that decreases the number of fuel lines and improves the fuel injection efficiency. The function of the Fuel Injector is to meter out the fuel thus making it have a significant role in determining how the engine runs.

In search of affordable OEM Honda Odyssey Fuel Injector? Consider browsing through our extensive inventory of genuine Honda Odyssey Fuel Injector. Not only do we provide market-leading prices and a manufacturer's warranty, but we also pride ourselves on exceptional customer service and swift delivery.

Honda Odyssey Fuel Injector Parts Questions & Experts Answers

Injector Set, Fuel
06164-P8E-A00
Q: How to remove and install Fuel Injectors and Fuel Rail on a Honda Odyssey?
A:
Relieve fuel pressure, disconnect battery cable, remove intake manifold cover and upper intake manifold. Disconnect electrical connectors from fuel injectors. For 2001 models, disconnect vacuum hose and fuel return hose from Fuel Pressure Regulator, and fuel supply hose from front fuel rail. For 2002 and later models, disconnect crossover hose from fuel rails or fuel hose from junction block. Remove fuel rail and injectors as one unit. Remove seal ring from each injector bore in cylinder head. Lubricate new cushion rings and O-rings with engine oil, insert fuel strainer into top of each injector, attach lower O-rings. Place injectors into fuel rail, lubricate new seal rings with engine oil, press into injector bore in intake manifold. Set injectors and fuel rail assembly on intake manifold, tighten fuel rail bolts. Reconnect battery cable, activate ignition switch to ON, inspect for leaks.