What are the signs and consequences of water pump failure in the Honda Passport?

Water pump failure can cause engine damage due to overheating. Check the pump's weep hole for leakage; gray discoloration is normal, but large brown stains suggest seal failure. If the seal fails, coolant leaks from the hole. Use an inspection mirror and flashlight to check the pump's underside. Black discoloration around the weep hole is normal, but brown residue or water dripping means the pump needs replacing. If the weep hole leaks, shaft bearing failure is imminent. Replace the pump immediately if this happens. If the shaft bearings fail, a howling sound may be heard from the engine. Bearing wear can be detected by rocking the water pump pulley. Don't confuse drive belt slippage, which causes a squealing sound, with water pump failure. Use belt dressing to rule out the belt as the noise source.

How to remove and install a water pump in the Honda Passport?

The water pump must be removed and the mounting surfaces cleaned. A new O-ring should be installed and sealant applied to the new gasket. The water pump is installed before tightening the bolts. Reverse the removal process to install it again, adjust belt tension, and fill in the coolant. At last start the engine to check if any leaks and adjust coolant level if necessary.

Genuine Honda Passport Water Pump

H2O Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Water Pumps found

View related parts
Honda Passport Water Pump (Yamada)
Part Number: 19200-RDV-J01
$180.06 MSRP: $263.25
You Save: $83.19 (32%)
ADD TO CART
Product Specifications
- Other Name: Water Pump Assembly; Water Pump
- Replaces: 19200-RDV-J01C, 19200-R70-A11, 19200-RDM-A02, 19200-RDM-A01, 19200-RCA-A01
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2019-2023 Honda Passport | 5 Door ELITE (AWD), 5 Door EX-L (2WD), 5 Door EX-L (AWD), 5 Door Sport (2WD), 5 Door Sport (AWD), 5 Door Touring (2WD), 5 Door Touring (AWD), EX-L, Elite, Sport, Touring, TrailSport | KA 9AT
View related parts
Honda Passport Water Pump Assembly
Part Number: 8-97125-975-0
$142.24 MSRP: $291.33
You Save: $149.09 (52%)
ADD TO CART
Product Specifications
- Other Name: Water Pump
- Replaces: 8-97061-280-0, 8-97125-424-0
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1994-1997 Honda Passport | 4 Door EX (4X4 V6), 4 Door EX-W (4X2 V6), 4 Door EX-W (4X4 V6), 4 Door LX (4X2 V6), 4 Door LX (4X4 V6), 4 Door LX-W (4X4 V6) | KA 4AT, KA 5MT, KL 4AT, KL 5MT
View related parts
Honda Passport Water Pump Assembly
Part Number: 8-97167-554-0
$216.58 MSRP: $354.87
You Save: $138.29 (39%)
ADD TO CART
Product Specifications
- Other Name: Water Pump
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1998-2002 Honda Passport | 4 Door 2EX, 4 Door 2EX-L, 4 Door 2LX, 4 Door 4EX, 4 Door 4EX-L, 4 Door 4LX, 4 Door 4LX-W | KA 4AT, KA 5MT, KL 4AT, KL 5MT
View related parts
Honda Passport Water Pump Assembly
Part Number: 8-97081-623-1
Product Specifications
- Other Name: Water Pump
- Replaces: 8-97081-623-0
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1994-1996 Honda Passport | 4 Door DX | KA 5MT, KL 5MT

Honda Passport Water Pump

The Water Pump belongs to the Center of Honda's Passport line automobiles for circulating coolant, from the radiator to the engine, where such coolant is to absorb heat resulting from combustion. Contemporary Water Pumps are normally of aluminum and contain a central shaft having an impeller to convey the coolant. Signs that indicate that the Water Pump is failing include; Leakages of coolant and overheating. Various main concerns are solved on an engine or vehicle, and one of the solutions is Performance Water Pumps for high-performance engines that provide improved coolant circulation and lower power consumption. The other is Electric Water Pumps and it has its advantages including coolant circulation that is independent of the engine and post engine shut off cooling. Several Water Pumps include the OEM production cast iron pump, the cast iron pump, and even the aluminum fabricated based on customers' specifications, with each designs providing differing engine cooling effectiveness.

In search of affordable OEM Honda Passport Water Pump? Consider browsing through our extensive inventory of genuine Honda Passport Water Pump. Not only do we provide market-leading prices and a manufacturer's warranty, but we also pride ourselves on exceptional customer service and swift delivery.

Honda Passport Water Pump Parts Questions & Experts Answers

Water Pump Assembly
8-97125-975-0
Q: What are the signs and consequences of water pump failure in the Honda Passport?
A: Water pump failure can cause engine damage due to overheating. Check the pump's weep hole for leakage; gray discoloration is normal, but large brown stains suggest seal failure. If the seal fails, coolant leaks from the hole. Use an inspection mirror and flashlight to check the pump's underside. Black discoloration around the weep hole is normal, but brown residue or water dripping means the pump needs replacing. If the weep hole leaks, shaft bearing failure is imminent. Replace the pump immediately if this happens. If the shaft bearings fail, a howling sound may be heard from the engine. Bearing wear can be detected by rocking the water pump pulley. Don't confuse drive belt slippage, which causes a squealing sound, with water pump failure. Use belt dressing to rule out the belt as the noise source.
Water Pump Assembly
8-97081-623-1
Q: How to remove and install a water pump in the Honda Passport?
A: The water pump must be removed and the mounting surfaces cleaned. A new O-ring should be installed and sealant applied to the new gasket. The water pump is installed before tightening the bolts. Reverse the removal process to install it again, adjust belt tension, and fill in the coolant. At last start the engine to check if any leaks and adjust coolant level if necessary.