Honda 76200-S30-A21ZB Mirror Assembly, Passenger Side Door (Iceberg Silver Metallic) (R.C.)

Instruction for assembling the mirror is as follows; Firstly, remove the negative battery cable. Next, lower the door glass and unsnap the inside triangular mirror trim by hand only, of course. In case the mirrors are furnished with power, it is essential that the electrical connection should be pulled out. The mirror mounting bolts or screws have to be unscrewed and then the mirror assembly pulled out. For removal, just reverse the steps mentioned above. When working with the mirror glass put on gloves and goggles. Move the given instructions at the back of the mirror holder and begin by pulling up the bottom hook of the mirror holder with the hand slowly pulling out the base until a click is heard indicating that it has come off the actuator. If at all there are some hooks that are fixed to the mirror holder, demount them and fix them to the actuator base. Make sure to correctly position the clips and hooks and place the mirror holder with equal pressure and click it to the base of the actuator. Last of all, one has to check the mirror operation.

Using an appropriate prytool, gently lift the cover off, after that unscrew the rubber damper on the mirror stalk. If the mirror is fixed by means of machine screws then unbolt the base, and take out the mirror. If not tightened through screwing pull the rearview mirror downwards to the bottom of the windscreen and unlock it from the spring of the mount without scratching the mirror base. Disassembly is the exact opposite of installation; if the mirror provided does not include mounting screws, align the mirror base with the mount, snap the mirror into place by rotating the base 90 degrees.