Honda 54315-SR2-982 Control Wire

If not already done, remove the center console. Shift to the Neutral position, then remove the retaining clip from the cable adjuster. There are two holes in the end of the shift cable. They're positioned 90-degrees apart to allow cable adjustments in 1/4-turn increments. Verify that the hole in the adjuster is perfectly aligned with the hole in the shift cable. If the two holes aren't perfectly aligned, loosen the locknut on the shift cable and adjust it as required, then retighten the locknut. Install the retaining clip on the adjuster. If the clip feels as if it's binding as you reinstall it, the cable is still out of adjustment and must be readjusted.