How to replace Fuel Injectors and Fuel Rail in a Honda Crosstour?

Relieve the fuel pressure, disconnect the battery cable, and remove the engine cover. Remove the air intake duct, electrical connectors, injector harness ground cable bolt, and quick-connect fitting. Remove the fuel rail and injectors, discard the old O-rings, and install new ones. Reassemble it, reconnect the battery cable, activate the fuel pump, check for leaks, start the engine, and verify the injectors are working.

Genuine Honda Crosstour Fuel Rail

Engine Fuel Rail

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Fuel Rails found

View related parts
Honda Crosstour Pipe Complete, Rear Fuel
Part Number: 16620-5G0-A01
$314.51 MSRP: $448.02
You Save: $133.51 (30%)
ADD TO CART
Product Specifications
- Other Name: Fuel Rail
- Position: Rear
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2013-2015 Honda Crosstour | 5 Door EX (2WD), 5 Door EX-L (2WD), 5 Door EX-L (4WD) | KA 6AT
View related parts
Honda Crosstour Fuel Pipe
Part Number: 16620-R40-A01
$191.47 MSRP: $272.75
You Save: $81.28 (30%)
ADD TO CART
Product Specifications
- Other Name: Fuel Rail
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2012-2015 Honda Crosstour | 5 Door EX, 5 Door EX-L | KA 5AT
View related parts
Honda Crosstour Pipe, Rear Fuel
Part Number: 16620-R70-A01
$298.20 MSRP: $424.78
You Save: $126.58 (30%)
ADD TO CART
Product Specifications
- Other Name: Fuel Rail
- Position: Rear
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2010-2012 Honda Crosstour | 5 Door EX (2WD), 5 Door EX-L (2WD), 5 Door EX-L (4WD) | KA 5AT
View related parts
Honda Crosstour Pipe, Front Fuel
Part Number: 16610-R70-A01
$298.20 MSRP: $424.78
You Save: $126.58 (30%)
Product Specifications
- Other Name: Fuel Rail
- Position: Front
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2010-2012 Honda Crosstour | 5 Door EX (2WD), 5 Door EX-L (2WD), 5 Door EX-L (4WD) | KA 5AT

Honda Crosstour Fuel Rail

Honda Crosstour Fuel Rail supplies pressurized fuel to the engine in a more precise way than previous setups, which gives the crossover lively power and cleaner combustion. The Fuel Rail, which is applied in Honda systems, stores the gasoline at a pressure of over 2,000 bar, then directs it through fast-acting solenoid valves so that the spray is broken down into countless tiny droplets. This ultra-fine mist is thoroughly mixed with the air and allows the Honda motor to generate more power while consuming less fuel. Early versions of Crosstour employed lower-pressure pump and unit-injector type equipment, but later versions of Crosstour have changed to a common rail style Fuel Rail assembly that maintains constant pressure for every cylinder. That upgrade made the primary difference between Crosstour generations, and the upgraded Fuel Rail is still a central part in Honda efficiency improvements, demonstrating the power of a modern Fuel Rail on everyday driving.

In search of affordable OEM Honda Crosstour Fuel Rail? Consider browsing through our extensive inventory of genuine Honda Crosstour Fuel Rail. Not only do we provide market-leading prices and a manufacturer's warranty, but we also pride ourselves on exceptional customer service and swift delivery.

Honda Crosstour Fuel Rail Parts Questions & Experts Answers

Pipe, Rear Fuel
16620-R70-A01
Q: How to replace Fuel Injectors and Fuel Rail in a Honda Crosstour?
A:
Relieve the fuel pressure, disconnect the battery cable, and remove the engine cover. Remove the air intake duct, electrical connectors, injector harness ground cable bolt, and quick-connect fitting. Remove the fuel rail and injectors, discard the old O-rings, and install new ones. Reassemble it, reconnect the battery cable, activate the fuel pump, check for leaks, start the engine, and verify the injectors are working.