Before disconnecting the battery cable or radio electrical connectors, note the radio security code, as the radio will not function until the code is entered after disconnection. The models in question are equipped with a Supplemental Restraint System (SRS) that includes an airbag, so it is essential to disable the SRS when working near components such as impact sensors, the airbag module, steering column, and instrument panel. Begin by noting the radio security code and disconnecting the negative battery cable, followed by disabling the SRS to avoid severe physical injury. To remove the glove box, open it and release the two limiting stops on both sides, then remove the two Phillips screws securing the hinges and take out the glove box, with installation being the reverse of removal. For the driver's side lower dash cover, remove the Phillips screws from the lower corners, carefully pull the panel to release the clips, and reinstall by reversing the removal steps. To access the driver's side lower knee bolster, first remove the lower dash cover, then take out the knee bolster mounting bolts and release it from the hooks, with installation following the reverse order of removal.