How do you replace the antenna on a Civic and a Del Sol?

To replace the antenna on a Civic, the user has first to remove the antenna lead found at the radio. After that, take a piece of string or wire and join it with the antenna lead at the radio end, next unscrew the mounting bolts and take out the antenna from the body pillar. Tie the wire or string on the new lead of the new antenna then as you lower the new lead into position the wire or string pulled in the pillar. Then there shall be disconnection of the string or wire and later connecting the antenna lead to the radio before finally firmly securing the nut at the base of the antenna mounting screw. Regarding disassembly, for the Del Sol, start at the mast, lock nut, then the nut, and finally, the spacer. Move on to the right side interior panel and you will have to take out the mounting nut and disconnect the antenna lead after which the assembly has to be pulled through an opening in the fender. Last of all, installation is just the opposite of removals.

Genuine Honda Del Sol Antenna

Radio Antenna

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Antennas found

View related parts
Honda Del Sol Antenna Assembly, Manual
Part Number: 08B40-SR2-100
Product Specifications
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1993 Honda Del Sol | 2 Door S, 2 Door SI | KA 4AT, KA 5MT, KL 4AT, KL 5MT
View related parts
Honda Del Sol Sub-Wire, Antenna
Part Number: 08B41-SR2-10002
Product Specifications
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1993-1997 Honda Del Sol | 2 Door S, 2 Door SI, 2 Door V-TEC | KA 4AT, KA 5MT, KL 4AT, KL 5MT
View related parts
Honda Del Sol Antenna Assembly, Automatic Radio
Part Number: 39150-SR2-A01
Product Specifications
- Replaced by: 39150-SR2-A02
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1993 Honda Del Sol | 2 Door S, 2 Door SI | KA 4AT, KA 5MT, KL 4AT, KL 5MT
View related parts
Honda Del Sol Antenna Assembly, Automatic Radio
Part Number: 39150-SR2-A02
Product Specifications
- Other Name: Manual Antenna; Antenna, Antenna Assembly
- Replaces: 39150-SR2-A01
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1993-1997 Honda Del Sol | 2 Door S, 2 Door SI, 2 Door V-TEC | KA 4AT, KA 5MT, KL 4AT, KL 5MT
View related parts
Honda Del Sol Antenna
Part Number: 08B41-SR2-100
Product Specifications
- Other Name: Antenna Assembly
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1994-1997 Honda Del Sol | 2 Door S, 2 Door SI, 2 Door V-TEC | KA 4AT, KA 5MT, KL 4AT, KL 5MT

Honda Del Sol Antenna

In search of affordable OEM Honda Del Sol Antenna? Consider browsing through our extensive inventory of genuine Honda Del Sol Antenna. Not only do we provide market-leading prices and a manufacturer's warranty, but we also pride ourselves on exceptional customer service and swift delivery.

Honda Del Sol Antenna Parts Questions & Experts Answers

Antenna Assembly, Automatic Radio
39150-SR2-A01
Q: How do you replace the antenna on a Civic and a Del Sol?
A:
To replace the antenna on a Civic, the user has first to remove the antenna lead found at the radio. After that, take a piece of string or wire and join it with the antenna lead at the radio end, next unscrew the mounting bolts and take out the antenna from the body pillar. Tie the wire or string on the new lead of the new antenna then as you lower the new lead into position the wire or string pulled in the pillar. Then there shall be disconnection of the string or wire and later connecting the antenna lead to the radio before finally firmly securing the nut at the base of the antenna mounting screw. Regarding disassembly, for the Del Sol, start at the mast, lock nut, then the nut, and finally, the spacer. Move on to the right side interior panel and you will have to take out the mounting nut and disconnect the antenna lead after which the assembly has to be pulled through an opening in the fender. Last of all, installation is just the opposite of removals.