How do you remove and reinstall a door window regulator on Honda Del Sol?

Remove the inside door handle, followed by the door trim panel and plastic shield. Next, take out the door window glass. Scribe or mark a line around the roller guide adjusting bolt to ensure proper reassembly before removing the mounting bolts. Remove the window regulator retaining bolts and the two roller guide bolts, then loosen the motor bolts and take out the regulator assembly through the hole in the center of the door. For power window models, unplug the electrical connector. Prior to installation, lubricate all contact surfaces with multi-purpose grease, and the installation process is the reverse of removal. To adjust the glass position evenly in the opening, loosen the roller guide or motor mounting bolts, raise the window as far as possible while ensuring it is centered in its channel, and then securely tighten the roller guide or motor mounting bolts.

Genuine Honda Del Sol Window Regulator

Electric Power Window Regulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Window Regulators found

View related parts
Honda Del Sol Regulator, Left Front Door Power
Part Number: 72251-SR2-003
Product Specifications
- Position: Front Driver Side
- Replaced by: 72251-SR2-013
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1993 Honda Del Sol | 2 Door S, 2 Door SI | KA 4AT, KA 5MT, KL 4AT, KL 5MT
View related parts
Honda Del Sol Regulator, Left Front Door Power
Part Number: 72251-SR2-013
Product Specifications
- Other Name: Window Regulator; Regulator
- Position: Front Driver Side
- Replaces: 72251-SR2-003
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1993-1997 Honda Del Sol | 2 Door S, 2 Door SI, 2 Door V-TEC | KA 4AT, KA 5MT, KL 4AT, KL 5MT
View related parts
Honda Del Sol Regulator, Right Front Door Power
Part Number: 72211-SR2-003
Product Specifications
- Position: Front Passenger Side
- Replaced by: 72211-SR2-013
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1993 Honda Del Sol | 2 Door S, 2 Door SI | KA 4AT, KA 5MT, KL 4AT, KL 5MT
View related parts
Honda Del Sol Regulator, Right Front Door Power
Part Number: 72211-SR2-013
Product Specifications
- Other Name: Window Regulator; Regulator
- Position: Front Passenger Side
- Replaces: 72211-SR2-003
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1993-1997 Honda Del Sol | 2 Door S, 2 Door SI, 2 Door V-TEC | KA 4AT, KA 5MT, KL 4AT, KL 5MT
View related parts
Honda Del Sol Regulator Assembly, Rear Windshield
Part Number: 85820-SR2-003
Product Specifications
- Other Name: Window Regulator; Regulator
- Position: Rear
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1993-1997 Honda Del Sol | 2 Door S, 2 Door SI, 2 Door V-TEC | KA 4AT, KA 5MT, KL 4AT, KL 5MT

Honda Del Sol Window Regulator

In search of affordable OEM Honda Del Sol Window Regulator? Consider browsing through our extensive inventory of genuine Honda Del Sol Window Regulator. Not only do we provide market-leading prices and a manufacturer's warranty, but we also pride ourselves on exceptional customer service and swift delivery.

Honda Del Sol Window Regulator Parts Questions & Experts Answers

Regulator, Right Front Door Power
72211-SR2-013
Q: How do you remove and reinstall a door window regulator on Honda Del Sol?
A:
Remove the inside Door Handle, followed by the Door Trim Panel and plastic shield. Next, take out the door window glass. Scribe or mark a line around the roller guide adjusting bolt to ensure proper reassembly before removing the mounting bolts. Remove the window regulator retaining bolts and the two roller guide bolts, then loosen the motor bolts and take out the regulator assembly through the hole in the center of the door. For power window models, unplug the electrical connector. Prior to installation, lubricate all contact surfaces with multi-purpose grease, and the installation process is the reverse of removal. To adjust the glass position evenly in the opening, loosen the roller guide or motor mounting bolts, raise the window as far as possible while ensuring it is centered in its channel, and then securely tighten the roller guide or motor mounting bolts.