Genuine Honda Fit EV Door Moldings

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Model

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Door Moldings found

View related parts
Honda Fit EV Right Front Door Molding Assembly
Part Number: 72410-TF0-003
$64.90 MSRP: $91.67
You Save: $26.77 (30%)
ADD TO CART
Product Specifications
- Other Name: Belt Molding
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2013-2014 Honda Fit EV | 5 Door STD | KL 1AT
View related parts
Honda Fit EV Right Rear Door Molding Assembly
Part Number: 72910-TF0-003
$61.36 MSRP: $86.67
You Save: $25.31 (30%)
ADD TO CART
Product Specifications
- Other Name: Belt Molding
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2013-2014 Honda Fit EV | 5 Door STD | KL 1AT
View related parts
Honda Fit EV Left Front Door Molding Assembly
Part Number: 72450-TF0-003
$64.90 MSRP: $91.67
You Save: $26.77 (30%)
ADD TO CART
Product Specifications
- Other Name: Belt Molding
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2013-2014 Honda Fit EV | 5 Door STD | KL 1AT
View related parts
Honda Fit EV Left Rear Door Molding Assembly
Part Number: 72950-TF0-003
$61.36 MSRP: $86.67
You Save: $25.31 (30%)
ADD TO CART
Product Specifications
- Other Name: Belt Molding
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2013-2014 Honda Fit EV | 5 Door STD | KL 1AT
View related parts
Honda Fit EV Garnish, L. FR. Door Sash
Part Number: 72470-TF0-003
$38.69 MSRP: $54.65
You Save: $15.96 (30%)
ADD TO CART
Product Specifications
- Other Name: Applique
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2013-2014 Honda Fit EV | 5 Door STD | KL 1AT
View related parts
Honda Fit EV Garnish, R. FR. Door Sash
Part Number: 72430-TF0-003
$38.69 MSRP: $54.65
You Save: $15.96 (30%)
ADD TO CART
Product Specifications
- Other Name: Applique
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2013-2014 Honda Fit EV | 5 Door STD | KL 1AT

Honda Fit EV Door Moldings

The Honda Fit EV Door Moldings protect the side panels against dents and chips and give the side walls a factory look. The Door Moldings fit all Fit EV from 2013 onward and fit into existing clips to install in alignment with OEM assembly with a paint line. The Door Moldings enhance aerodynamics by pushing the air through the motor without obstruction by parking lot bumps and loose gravel, which also conserve battery power on long commutes. The composite lightweight construction is resistant to rust, a trait that has been widely recognized as Honda longevity, and it remains shiny despite rough weather conditions. This dependability will add another layer of trust to the owners of Fit EVs regarding their investment in Honda. The narrow profile does not interfere with side airbags, and therefore, there is no loss of safety systems during all the Fit EV trips. Weather seals on the inside of the edge prevent the creep of water and dirt behind the Door Moldings, restricting corrosion around the critical spot welds. Owners like the fact that compatibility spans base and Advanced trims, which allows any driver to revitalize body style without the need to guess at cross-hardware or finish, which is guaranteed by Honda manufacturing standards. Located at the optimally broad part of the body, the Door Moldings form a slight line, which flows the air backward and collaborates with the low-rolling-resistance tires to squeeze additional miles out of a Fit EV charge. The Door Moldings are polished on the edges, and they reflect sunlight but remain cool, a minor but clever touch that emphasizes the spirit of innovativeness that people expect from Honda engineering. Taken together, these Door Moldings are reliable, efficient to install, and thus they become an excellent addition to any daily driven Fit EV and contribute to the established image of trusted performance of Honda.

In search of affordable OEM Honda Fit EV Door Moldings? Consider browsing through our extensive inventory of genuine Honda Fit EV Door Moldings. Not only do we provide market-leading prices and a manufacturer's warranty, but we also pride ourselves on exceptional customer service and swift delivery.