How to Remove and Install the Crankshaft Position Sensor in the Honda Ridgeline?

Put the front of the vehicle up in the air, then use jackstands to keep it lifted. Remove the engine cover. Lift and support the vehicle, then disconnect the engine cover. Take off the crankshaft pulley and both upper and lower timing belt covers. Loosen the bolts holding the CKP sensor harness shield, then detach both shield nuts and free the sensor and shield wiring. Unbolt and remove the CKP sensor, carefully take the sensor out of its engine block location, disconnect the electrical wire, and lift the sensor out. Installation is the reverse of removal.

Genuine Honda Ridgeline Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Crankshaft Position Sensors found

View related parts
Honda Ridgeline Sensor Assembly, Crank
Part Number: 37500-R40-A01
$162.56 MSRP: $237.67
You Save: $75.11 (32%)
ADD TO CART
Product Specifications
- Other Name: Crankshaft Position Sensor; Crankshaft Sensor
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2009-2014 Honda Ridgeline | 4 Door RT, 4 Door RTL, 4 Door RTS, 4 Door Sport | KA 5AT
View related parts
Honda Ridgeline Sensor Assembly, Crank (1-2)
Part Number: 37500-RCA-A01
$441.86 MSRP: $637.60
You Save: $195.74 (31%)
ADD TO CART
Product Specifications
- Other Name: Crankshaft Position Sensor; Crankshaft Sensor
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2006-2008 Honda Ridgeline | 4 Door RT, 4 Door RTL, 4 Door RTS, 4 Door RTX | KA 5AT
View related parts
Honda Ridgeline Sensor Assembly, Crank
Part Number: 37500-5J6-A01
$133.62 MSRP: $195.35
You Save: $61.73 (32%)
ADD TO CART
Product Specifications
- Other Name: Crankshaft Position Sensor; Crankshaft Sensor
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2017-2026 Honda Ridgeline | 4 Door Black, 4 Door Black Edition, 4 Door Black Edition AWD, 4 Door Black Edition Two-Tone, 4 Door RT (2WD), 4 Door RT (AWD), 4 Door RTL, 4 Door RTL (2WD), 4 Door RTL (AWD), 4 Door RTL AWD, 4 Door RTL-E AWD, 4 Door RTS (2WD), 4 Door RTS (AWD), 4 Door Sport, 4 Door Sport (2WD), 4 Door Sport (AWD), 4 Door Sport AWD, 4 Door TrailSport, 4 Door TrailSport AWD, 4 Door TrailSport With HPD Wheels | 9AT, KA 6AT, KA 9AT

Honda Ridgeline Crankshaft Position Sensor

The Crankshaft Position Sensor in Honda Ridgeline vehicles is as vital as the other sensors in that it helps in measuring the crankshaft position and the rate of its rotation, information that is dispatched to the powertrain control module. These parameters are then used to effectively control ignition time and fuel inject time influencing several parameters of the engines. Regarding the role of the sensor in these new models of management, these interact with a camshaft position sensor other to perform the function of variable valve timing and initiation of the starting of the engine. Some of the usual used Forms of the Sensor are inductive sensors, the Hall Effect sensors, magnetoresistive sensors, and optical sensors and all these forms are not the same regarding strengths and weaknesses. A faulty crank sensor causes starting troubles, and a cut-off of the engine; the symptoms include irregular idling and sluggish acceleration. In sum, the Crankshaft Position Sensor plays a critical role when it comes to Honda Ridgeline cars' performance.

In search of affordable OEM Honda Ridgeline Crankshaft Position Sensor? Consider browsing through our extensive inventory of genuine Honda Ridgeline Crankshaft Position Sensor. Not only do we provide market-leading prices and a manufacturer's warranty, but we also pride ourselves on exceptional customer service and swift delivery.

Honda Ridgeline Crankshaft Position Sensor Parts Questions & Experts Answers

Sensor Assembly, Crank (1-2)
37500-RCA-A01
Q: How to Remove and Install the Crankshaft Position Sensor in the Honda Ridgeline?
A:
Put the front of the vehicle up in the air, then use jackstands to keep it lifted. Remove the engine cover. Lift and support the vehicle, then disconnect the engine cover. Take off the crankshaft pulley and both upper and lower timing belt covers. Loosen the bolts holding the CKP sensor harness shield, then detach both shield nuts and free the sensor and shield wiring. Unbolt and remove the CKP sensor, carefully take the sensor out of its engine block location, disconnect the electrical wire, and lift the sensor out. Installation is the reverse of removal.