Honda 51300-SR3-N02 Spring, Front Stabilizer (22Mm)

It is possible to start by engaging the parking brake and then removing the lug nuts of the front wheel. Lift the front of the vehicle and then set it on jackstands afterward then remove the wheels. Then with the help of a wrench loosen the bolts which hold the sway bar kit bracket to the under side of the car. Remove the nut and bolt of the sway bar link bolts to the lower control arms then take out the sway bar link assembly while noting the spacers washers and the bushing on the link bolt. After that, the bar has to be withdrawn under the vehicle; Take out both ends of the brackets on the sway bar kit and ensure that the bushings are not cracked, hardened or in any way damaged; if they are scrap them. Last but not least, it is tried to reestablish all, hoping for the setup's success in spite of all the occurred during its removal.