How to Replace the Rear Brake Shoe Set and Parking Brake Shoe on a Honda CR-V?

Remove the front tire's lug nuts, lift the van's back, put jackstands under it, then block the front tires to stop any rolling. Release the parking brake and remove the wheel. Put in two 8 X 1.25 mm bolts, one at a time, into the drum holes. Push them on and off to move the drum apart from the hub, and then take the drum off. If you can't pull off the drum easily, confirm your parking brake is properly off, and if that doesn't work, access the backing plate's backup by removing a plug and adjust the star wheel guide to retract the shoe. If you find damage on the drum, have it repaired by machining or replacing it. Spray brake system cleaner on the brake shoes, take them off, and put new ones in following specific steps: loosening clips and springs, cleaning out the adjuster, applying grease to each part, and putting everything back together in the correct order. Before putting the drum back in place, check it for cracks and fix any signs of damage. Adjust it to the right position. Once the tire is in place, tighten all lug nuts before making more stops. Then push the parking brake to adjust your brakes each time. When changing brakes on the rear of a vehicle, follow the same steps again: first, release the lug nuts; then, raise the car; take off the wheels; and replace the brake shoes. Follow these steps: clean the brake assembly, take off the brake shoe's springs and clips, then remove the shoes. Be sure to put on new footwear correctly when lubricating and connecting parts together. Always test the brakes before you leave the garage.

Genuine Honda CR-V Parking Brake Shoe

Emergency Parking Brake Shoe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Parking Brake Shoes found

View related parts
Honda CR-V Shoe, Parking Brake
Part Number: 43154-STK-A01
$20.27 MSRP: $28.63
You Save: $8.36 (30%)
ADD TO CART
Product Specifications
- Other Name: Park Brake Shoes; Parking Brake Shoes, Shoes
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2007-2016 Honda CR-V | 5 Door EX (2WD), 5 Door EX (4WD), 5 Door EX (AWD), 5 Door EX-L (2WD), 5 Door EX-L (4WD), 5 Door EX-L (AWD), 5 Door LX (2WD), 5 Door LX (4WD), 5 Door LX (AWD), 5 Door SE (2WD), 5 Door SE (4WD), 5 Door SE (AWD), 5 Door Touring (2WD), 5 Door Touring (AWD) | KA 5AT, KA CVT
View related parts
Honda CR-V Shoe, Parking Brake
Part Number: 43154-S47-N01
$25.15 MSRP: $35.52
You Save: $10.37 (30%)
ADD TO CART
Product Specifications
- Other Name: Shoes
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2002-2004 Honda CR-V | 5 Door EX (4WD), 5 Door LX (2WD), 5 Door LX (4WD) | KA 4AT, KA 5MT
View related parts
Honda CR-V Rear Brake Shoe Set
Part Number: 43053-S10-A01
$87.11 MSRP: $123.03
You Save: $35.92 (30%)
ADD TO CART
Product Specifications
- Other Name: Shoe Set, Rear Brake
- Position: Rear
- Replaced by: 43053-S10-A02
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1997-2001 Honda CR-V | 5 Door EX, 5 Door LX (2WD), 5 Door LX (4WD), 5 Door SE | KA 4AT, KA 5MT, KL 4AT, KL 5MT
View related parts
Honda CR-V Rear Brake Shoe Set
Part Number: 43053-S9A-E53
$87.11 MSRP: $123.03
You Save: $35.92 (30%)
ADD TO CART
Product Specifications
- Other Name: Shoes
- Position: Rear
- Replaces: 43053-S9A-E52, 43053-S9A-E51, 43053-S9A-E50
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2005-2006 Honda CR-V | 5 Door EX, 5 Door EX (2WD), 5 Door EX (4WD), 5 Door LX (2WD), 5 Door LX (4WD), 5 Door SE | KA 5AT, KA 5MT
View related parts
Honda CR-V Rear Brake Shoe Set
Part Number: 43053-S9A-E52
$87.11 MSRP: $123.03
You Save: $35.92 (30%)
ADD TO CART
Product Specifications
- Other Name: Shoe Set, Rear Brake
- Position: Rear
- Replaced by: 43053-S9A-E53
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2005-2006 Honda CR-V | 5 Door EX, 5 Door EX (2WD), 5 Door EX (4WD), 5 Door LX (2WD), 5 Door LX (4WD), 5 Door SE | KA 5AT, KA 5MT

Honda CR-V Parking Brake Shoe

The Parking Brake Shoe in cars involve the key element of braking duty of the vehicle when it is parked by restraining the wheels. Like in the case of the ordinary brake, the Parking Brake Shoe makes use of brake lining to develop friction against the wall of the drum hence stopping the wheels from rotating once the parking brake is pulled. It is good to understand that through out the evolution of the Honda CR-V models different types of Parking Brake Shoes may be used but they are all designed to achieve just one function of holding the wheels steady when they are parked.

In search of affordable OEM Honda CR-V Parking Brake Shoe? Consider browsing through our extensive inventory of genuine Honda CR-V Parking Brake Shoe. Not only do we provide market-leading prices and a manufacturer's warranty, but we also pride ourselves on exceptional customer service and swift delivery.

Honda CR-V Parking Brake Shoe Parts Questions & Experts Answers

Shoe, Parking Brake
43154-STK-A01
Q: How to Replace the Rear Brake Shoe Set and Parking Brake Shoe on a Honda CR-V?
A:
Remove the front tire's lug nuts, lift the van's back, put jackstands under it, then block the front tires to stop any rolling. Release the parking brake and remove the wheel. Put in two 8 X 1.25 mm bolts, one at a time, into the drum holes. Push them on and off to move the drum apart from the hub, and then take the drum off. If you can't pull off the drum easily, confirm your parking brake is properly off, and if that doesn't work, access the backing plate's backup by removing a plug and adjust the star wheel guide to retract the shoe. If you find damage on the drum, have it repaired by machining or replacing it. Spray brake system cleaner on the brake shoes, take them off, and put new ones in following specific steps: loosening clips and springs, cleaning out the adjuster, applying grease to each part, and putting everything back together in the correct order. Before putting the drum back in place, check it for cracks and fix any signs of damage. Adjust it to the right position. Once the tire is in place, tighten all lug nuts before making more stops. Then push the parking brake to adjust your brakes each time. When changing brakes on the rear of a vehicle, follow the same steps again: first, release the lug nuts; then, raise the car; take off the wheels; and replace the brake shoes. Follow these steps: clean the brake assembly, take off the brake shoe's springs and clips, then remove the shoes. Be sure to put on new footwear correctly when lubricating and connecting parts together. Always test the brakes before you leave the garage.