First, remove the negative cable then remove the positive cable, if the stereo unit has an anti theft system then ensure to have the correct code for the stereo. Then, remove all the fluid hoses at the pump: unscrew the pressure line bolts and delete the return line clamp; remove the adjuster bolt and the mounting bolts: it is necessary to know that the return hose is fastened with the spring-type clamp but the pressure line is fastened with two bolts. Securing one end of the hose with your hands, pinch the other end to shut it, and do the same thing for the second hose, and put a fresh O-ring on the end of the Pressure line. Subsequently, loosen the adjusting bolts of the pump and other mounting bolts to unload the pump and withdrawal it from the engine. When doing the installation the process is done in reverse order of the removal process, and the power steering system must be bled while at the same time tightening the drive belt.