Genuine Honda Ridgeline Control Arm Bracket

Suspension Arm Bracket

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Model

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Control Arm Brackets found

View related parts
Honda Ridgeline Bracket, R. FR. Compliance
Part Number: 51390-TZ5-A00
$73.31 MSRP: $103.55
You Save: $30.24 (30%)
ADD TO CART
Product Specifications
- Other Name: Lower Control Arm Bracket
- Replaced by: 51390-TZ5-A10
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2017-2020 Honda Ridgeline | 4 Door Black, 4 Door RT (2WD), 4 Door RT (AWD), 4 Door RTL, 4 Door RTL (2WD), 4 Door RTL (AWD), 4 Door RTS (2WD), 4 Door RTS (AWD), 4 Door Sport (2WD), 4 Door Sport (AWD) | KA 6AT, KA 9AT
View related parts
Honda Ridgeline Bracket, Left Front Compliance
Part Number: 51395-TZ5-A00
$73.31 MSRP: $103.55
You Save: $30.24 (30%)
ADD TO CART
Product Specifications
- Other Name: Lower Control Arm Bracket
- Position: Front Driver Side
- Replaced by: 51395-TZ5-A10
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2017-2020 Honda Ridgeline | 4 Door Black, 4 Door RT (2WD), 4 Door RT (AWD), 4 Door RTL, 4 Door RTL (2WD), 4 Door RTL (AWD), 4 Door RTS (2WD), 4 Door RTS (AWD), 4 Door Sport (2WD), 4 Door Sport (AWD) | KA 6AT, KA 9AT
View related parts
Honda Ridgeline Bracket, Front
Part Number: 51395-TZ5-A10
$73.31 MSRP: $103.55
You Save: $30.24 (30%)
ADD TO CART
Product Specifications
- Other Name: Bushings, Lower Control Arm Bracket, Rear Bracket
- Position: Driver Side
- Replaces: 51395-TZ5-A00
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2017-2026 Honda Ridgeline | 4 Door Black, 4 Door Black Edition, 4 Door Black Edition AWD, 4 Door Black Edition Two-Tone, 4 Door RT (2WD), 4 Door RT (AWD), 4 Door RTL, 4 Door RTL (2WD), 4 Door RTL (AWD), 4 Door RTL AWD, 4 Door RTL-E AWD, 4 Door RTS (2WD), 4 Door RTS (AWD), 4 Door Sport, 4 Door Sport (2WD), 4 Door Sport (AWD), 4 Door Sport AWD, 4 Door TrailSport, 4 Door TrailSport AWD, 4 Door TrailSport With HPD Wheels | 9AT, KA 6AT, KA 9AT
View related parts
Honda Ridgeline Bracket, Front
Part Number: 51390-TZ5-A10
$73.31 MSRP: $103.55
You Save: $30.24 (30%)
ADD TO CART
Product Specifications
- Other Name: Bushings, Lower Control Arm Bracket, Rear Bracket
- Position: Passenger Side
- Replaces: 51390-TZ5-A00
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2017-2026 Honda Ridgeline | 4 Door Black, 4 Door Black Edition, 4 Door Black Edition AWD, 4 Door Black Edition Two-Tone, 4 Door RT (2WD), 4 Door RT (AWD), 4 Door RTL, 4 Door RTL (2WD), 4 Door RTL (AWD), 4 Door RTL AWD, 4 Door RTL-E AWD, 4 Door RTS (2WD), 4 Door RTS (AWD), 4 Door Sport, 4 Door Sport (2WD), 4 Door Sport (AWD), 4 Door Sport AWD, 4 Door TrailSport, 4 Door TrailSport AWD, 4 Door TrailSport With HPD Wheels | 9AT, KA 6AT, KA 9AT

Honda Ridgeline Control Arm Bracket

The Honda Ridgeline Control Arm Bracket helps to keep the lower suspension arm attached to the frame to keep wheel travel in line and ride smooth. This Control Arm Bracket is like a hinge with bushings that allow the arm to swing freely while the bumps are absorbed and spare the passenger from jolts. Early versions of the steel were strong but rust-prone, so Honda later turned to cast iron and then lighter aluminum, a decision that improved handling and also reduced fuel consumption. Each Ridgeline mounts the Control Arm Bracket to a reinforced point on the chassis, reducing vibration and maintaining factory alignment to preserve tire life. When a curb bends hardware, a straight Control Arm Bracket prevents camber drift that may tug the vehicle off course. A new Control Arm Bracket also provides back the car-like steering feel of the pickup for daily drives and weekend trails. Compatibility is across first and second generation Ridgeline models, allowing owners of a 2006 pioneer or a recent refresh to switch in the same part with exactly machined geometry. Installation is simple, old welds are removed, the new Honda Control Arm Bracket is test-fit, clamped, then totally secured, bringing back rigidity and no unwanted weight. Corrosion resistant coatings and tight tolerance bushings make this Ridgeline Control Arm Bracket stand out above the ordinary suspension mounts. By keeping the alignment on track for tens of thousands of miles, the Control Arm Bracket increases braking stability, cornering confidence, and safety. Such reliable operation serves to reinforce the Honda reputation for building a Ridgeline that works hard but drives like a tuned sedan. Drivers repeatedly comment that Honda attention to detail shows every time that the truck tracks straight over rough pavement.

In search of affordable OEM Honda Ridgeline Control Arm Bracket? Consider browsing through our extensive inventory of genuine Honda Ridgeline Control Arm Bracket. Not only do we provide market-leading prices and a manufacturer's warranty, but we also pride ourselves on exceptional customer service and swift delivery.