What is the step-by-step process for crankshaft removal on the Honda Ridgeline?

Before removal of the crankshaft, the drive plate, the crankshaft pulley, and piston assemblies should be first removed. The endplay of the crankshaft is checked before loosening and removing the bolts that holds main bearing cap. Thereafter, the crankshaft is lifted off from the engine. Using Plastigage on main bearing oil clearance and lubricating through main bearing caps are some of these checks. Finally, you can check again to ensure that there is a correct endplay in the crankshaft then install a new rear main oil seal.

Genuine Honda Ridgeline Crankshaft

Crank Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Crankshafts found

View related parts
Honda Ridgeline Crankshaft
Part Number: 13310-5J6-A00
$143.51 MSRP: $188.70
You Save: $45.19 (24%)
ADD TO CART
Product Specifications
- Replaced by: 13310-5J6-A10
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2017-2021 Honda Ridgeline | 4 Door Black, 4 Door RT (2WD), 4 Door RT (AWD), 4 Door RTL, 4 Door RTL (2WD), 4 Door RTL (AWD), 4 Door RTS (2WD), 4 Door RTS (AWD), 4 Door Sport (2WD), 4 Door Sport (AWD) | KA 6AT, KA 9AT
View related parts
Honda Ridgeline Crankshaft
Part Number: 13310-R70-A20
$1063.22 MSRP: $1416.22
You Save: $353.00 (25%)
ADD TO CART
Product Specifications
- Replaces: 13310-R70-A10, 13310-R70-A00
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2009-2014 Honda Ridgeline | 4 Door RT, 4 Door RTL, 4 Door RTS, 4 Door Sport | KA 5AT
View related parts
Honda Ridgeline Crankshaft
Part Number: 13310-RDJ-A02
$1747.39 MSRP: $2327.52
You Save: $580.13 (25%)
ADD TO CART
Product Specifications
- Replaces: 13310-RDJ-A01
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2006-2008 Honda Ridgeline | 4 Door RT, 4 Door RTL, 4 Door RTS, 4 Door RTX | KA 5AT
View related parts
Honda Ridgeline CRANKSHAFT COMP
Part Number: 13310-5J6-A10
$143.51 MSRP: $188.70
You Save: $45.19 (24%)
ADD TO CART
Product Specifications
- Other Name: Crankshaft
- Replaces: 13310-5J6-A00
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2022-2026 Honda Ridgeline | 4 Door Black Edition, 4 Door Black Edition AWD, 4 Door Black Edition Two-Tone, 4 Door RTL, 4 Door RTL AWD, 4 Door RTL-E AWD, 4 Door Sport, 4 Door Sport AWD, 4 Door TrailSport, 4 Door TrailSport AWD, 4 Door TrailSport With HPD Wheels | 9AT

Honda Ridgeline Crankshaft

The Honda Ridgeline Crankshaft functions as a vital system component because it converts piston back-and-forth motion into wheel-rotating motion that moves through the transmission. The engine block contains this element which utilizes connecting rods attached to offset crank throws to achieve the conversion. Different Honda Crankshaft use cast irons to manufacture lower-performance variations while the higher-horsepower models incorporate forged steel structures because both materials yield reliable performance and long-lasting operation. The engineered components receive manufacturing precision that enables them to function throughout the lifespan of the vehicle with regular care. Engine neglect allows dust and low oil flow to create problems that cause damage to engine components named journal scoring and engine knock. Standard Honda Ridgeline Crankshaft designs for contemporary Ridgeline models exist but different materials and manufacturing methods can be observed according to engine specifications. Routine checks combined with proper replacements remain vital to achieve the optimal engine performance.

In search of affordable OEM Honda Ridgeline Crankshaft? Consider browsing through our extensive inventory of genuine Honda Ridgeline Crankshaft. Not only do we provide market-leading prices and a manufacturer's warranty, but we also pride ourselves on exceptional customer service and swift delivery.

Honda Ridgeline Crankshaft Parts Questions & Experts Answers

Crankshaft
13310-R70-A20
Q: What is the step-by-step process for crankshaft removal on the Honda Ridgeline?
A:
Before removal of the crankshaft, the drive plate, the crankshaft pulley, and piston assemblies should be first removed. The endplay of the crankshaft is checked before loosening and removing the bolts that holds main bearing cap. Thereafter, the crankshaft is lifted off from the engine. Using Plastigage on main bearing oil clearance and lubricating through main bearing caps are some of these checks. Finally, you can check again to ensure that there is a correct endplay in the crankshaft then install a new rear main oil seal.