What preliminary steps should be taken before removing an engine for overhaul or major repair work on Honda Accord?

In case an engine has to be removed for overhaul or major repair work, several precaution should be observed which includes among the following, Carefully study all the removal and installation instructions. The selection of the place is critically important as much space as possible must be provided for the vehicle and storage; if a car shop or a garage is impossible then a flat, clean and level ground made of concrete or asphalt is needed. Setting the tools orderly helps the cleaning of the engine compartment and the engine before starting the removal process; while tightly wrapping water-susceptible parts, a spray cleaner should be applied particularly to the grease-dripping area and then washed off. An engine hoist that has a rating higher than the total weight of the engine and transaxle is required and above all safety is important due to the dangers involved. On models with a V6 power plant, the raising of the power train unit from the engine bay is necessary, for this a vehicle hoist is necessary as the sub frame has to be detached. If one does not have any prior experience doing this, it is recommended to have at least one assisting you because swapping out a heavy engine and transaxle assembly is rather taxing on a single individual. Some of the preparations for the operation that must be made include ensuring that all the tools and equipment to be used are ready, right from the engine stand, the floor jack, the wrenches and sockets, the wooden blocks, and cleaning materials. Furthermore, it is expected that vehicle's availability can be low, that is why consulting a machine shop for the approximate time needed for rebuilding or repairing of necessary parts is advised.

Genuine Honda Accord Engine

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

82 Engines found

View related parts
Honda Accord Cylinder Head Assembly
Part Number: 12100-RDF-A00
$1230.58 MSRP: $1619.55
You Save: $388.97 (25%)
ADD TO CART
Product Specifications
- Other Name: Cylinder Head
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2015-2017 Honda Accord | 2 Door EX, 2 Door EX-L, 2 Door LX-S, 4 Door EX, 4 Door EX-L, 4 Door LX, 4 Door SE, 4 Door Sport | KA 6MT, KA CVT, KL CVT
View related parts
Honda Accord Engine Sub-Assy (Blo)
Part Number: 10002-5A2-A01
$4478.11 MSRP: $5945.26
You Save: $1467.15 (25%)
ADD TO CART
Product Specifications
- Other Name: Short Block
- Replaces: 10002-5A2-X01, 10002-5A2-A00, 10002-5A2-X00
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2013-2015 Honda Accord | 2 Door EX, 2 Door EX-L, 2 Door LX-S, 4 Door EX, 4 Door EX-L, 4 Door LX, 4 Door Sport | KA 6MT, KA CVT, KL 6MT, KL CVT
View related parts
Honda Accord General Assembly
Part Number: 10002-R70-A11
$4296.52 MSRP: $5722.97
You Save: $1426.45 (25%)
ADD TO CART
Product Specifications
- Other Name: Short Block
- Replaces: 10002-R70-A10
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2011-2012 Honda Accord | 2 Door EX-L V6, 4 Door EX-L V6, 4 Door EX-V6 | KA 5AT
View related parts
Honda Accord Cylinder Head General Assembly
Part Number: 10003-6B2-A00
$2623.58 MSRP: $3475.03
You Save: $851.45 (25%)
ADD TO CART
Product Specifications
- Other Name: General Assembly, Cylinder Head
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2018-2022 Honda Accord | 4 Door (2.0 Sport), 4 Door (2.0 Touring), 4 Door 2.0T Sport, 4 Door 2.0T Touring, 4 Door EX-L (2.0) | 10AT, KA 6MT, KA XAT
View related parts
Honda Accord Engine Sub-Assy (Blo)
Part Number: 10002-5G0-A02
$3478.61 MSRP: $4613.94
You Save: $1135.33 (25%)
ADD TO CART
Product Specifications
- Other Name: Short Block
- Replaces: 10002-5G0-A01
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2013-2017 Honda Accord | 2 Door EX-L V6, 2 Door TRN-V6, 2 Door Touring (V6), 4 Door EX-L V6, 4 Door Touring (V6) | KA 6AT, KL 6AT
View related parts
Honda Accord Engine Sub-Assy (Block)
Part Number: 10002-5A2-A10
$3011.37 MSRP: $3991.57
You Save: $980.20 (25%)
ADD TO CART
Product Specifications
- Other Name: Short Block
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2016-2017 Honda Accord | 2 Door EX, 2 Door EX-L, 2 Door LX-S, 4 Door EX, 4 Door EX-L, 4 Door LX, 4 Door SE, 4 Door Sport | KA 6MT, KA CVT, KL CVT
View related parts
Honda Accord Cylinder Head Assembly
Part Number: 12100-6B2-A00
$1332.00 MSRP: $1754.65
You Save: $422.65 (25%)
ADD TO CART
Product Specifications
- Other Name: Cylinder Head
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2018-2022 Honda Accord | 4 Door (2.0 Sport), 4 Door (2.0 Touring), 4 Door 2.0T Sport, 4 Door 2.0T Touring, 4 Door EX-L (2.0) | 10AT, KA 6MT, KA XAT
View related parts
Honda Accord Cylinder Block General Assembly (DOT)
Part Number: 10002-P8C-A03
$947.03 MSRP: $7758.75
You Save: $6811.72 (88%)
ADD TO CART
Product Specifications
- Other Name: Short Block
- Replaces: 10002-P8C-C01, 10002-P8C-E00, 10002-P8C-E03, 10002-P8C-A02, 10002-P8C-A01, 10002-P8C-C00, 10002-P8C-E01, 10002-P8C-E02, 10002-P8C-A00
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1998-2002 Honda Accord | 2 Door EX (V6), 2 Door LX (V6), 4 Door EX (V6), 4 Door EX-V6, 4 Door LX (V6), 4 Door LX V6 | KA 4AT, KL 4AT
View related parts
Honda Accord Cylinder Block General Assembly
Part Number: 10002-P0J-305
$4452.17 MSRP: $6424.48
You Save: $1972.31 (31%)
ADD TO CART
Product Specifications
- Other Name: Short Block
- Replaces: 10002-P0J-A02
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1995-1997 Honda Accord | 2 Door LX, 2 Door Special, 4 Door DX, 4 Door DX-VP, 4 Door LX, 4 Door Special, 5 Door LX | KA 4AT, KA 5MT, KL 4AT, KL 5MT
View related parts
Honda Accord Cylinder Block General Assembly
Part Number: 10002-6B2-A01
$2930.61 MSRP: $3884.00
You Save: $953.39 (25%)
ADD TO CART
Product Specifications
- Other Name: General Assy., Cylinder Block
- Replaced by: 10002-6B2-A03
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2018-2020 Honda Accord | 4 Door (2.0 Sport), 4 Door (2.0 Touring), 4 Door EX-L (2.0) | KA 6MT, KA XAT
View related parts
Honda Accord General Assy. (DOT)
Part Number: 10002-RCA-305
$4707.34 MSRP: $11018.87
You Save: $6311.53 (58%)
ADD TO CART
Product Specifications
- Other Name: Short Block
- Replaces: 10002-RCA-A04, 10002-RCA-A03, 10002-RCA-M01, 10002-RCA-M03, 10002-RCA-X01, 10002-RCA-M00, 10002-RCA-M02, 10002-RCA-X02
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2006-2007 Honda Accord | 2 Door EX (V6), 2 Door EX V6, 2 Door EX-V6, 2 Door LX (V6), 2 Door LX V6, 4 Door EX (V6), 4 Door LX (V6), 4 Door SE (V6) | KA 5AT, KA 6MT, KL 5AT, KL 6MT
View related parts
Honda Accord General Assembly
Part Number: 10002-R70-A02
$4296.29 MSRP: $5722.66
You Save: $1426.37 (25%)
ADD TO CART
Product Specifications
- Other Name: Short Block
- Replaces: 10002-R70-A01, 10002-R70-A00
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2008-2010 Honda Accord | 2 Door EX-L V6, 4 Door EX-L V6, 4 Door EX-V6, 4 Door EX-V6 (PZEV) | KA 5AT, KL 5AT
View related parts
Honda Accord Cylinder Block General Assembly
Part Number: 10002-RAD-A01
$6522.46 MSRP: $8687.92
You Save: $2165.46 (25%)
ADD TO CART
Product Specifications
- Other Name: General Assy., Cylinder Block
- Replaced by: 10002-RAD-A12
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2003-2005 Honda Accord | 4 Door DX, 4 Door EX, 4 Door EX-L, 4 Door LX | KA 5AT, KA 5MT, KL 5AT
View related parts
Honda Accord Cylinder Block General Assembly
Part Number: 10002-6A0-A00
$1663.84 MSRP: $2196.66
You Save: $532.82 (25%)
ADD TO CART
Product Specifications
- Other Name: General Assy., Cylinder Block
- Replaced by: 10002-6A0-A02
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2018-2019 Honda Accord | 4 Door EX, 4 Door EX-L, 4 Door LX, 4 Door Sport, 4 Door Touring | KA 6MT, KA CVT
View related parts
Honda Accord Cylinder Block General Assembly (DOT)
Part Number: 10002-PJK-A23
$3552.86 MSRP: $5126.78
You Save: $1573.92 (31%)
ADD TO CART
Product Specifications
- Other Name: General Assy., Cylinder Block (DOT)
- Replaced by: 10002-PJK-A24
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1999-2000 Honda Accord | 4 Door EX, 4 Door EX-L, 4 Door LX, 4 Door SE | KA 4AT, KA 5MT
View related parts
Honda Accord GENERAL ASSY
Part Number: 10002-6B2-A02
$2930.61 MSRP: $3884.00
You Save: $953.39 (25%)
ADD TO CART
Product Specifications
- Replaced by: 10002-6B2-A03
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2020-2021 Honda Accord | 4 Door (2.0 Sport), 4 Door (2.0 Touring), 4 Door EX-L (2.0) | KA 6MT, KA XAT
View related parts
Honda Accord Cylinder Head Assembly
Part Number: 12100-6A0-A00
$1045.70 MSRP: $1373.29
You Save: $327.59 (24%)
Product Specifications
- Other Name: Cylinder Head
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2018-2022 Honda Accord | 4 Door 1.5T EX-L, 4 Door 1.5T LX, 4 Door 1.5T Sport, 4 Door 1.5T Sport SE, 4 Door EX, 4 Door EX-L, 4 Door LX, 4 Door Sport, 4 Door Touring | CVT, KA 6MT, KA CVT
View related parts
Honda Accord Cylinder Block General Assembly
Part Number: 10002-RAA-A04
Product Specifications
- Other Name: Short Block
- Replaces: 10002-RAA-M03, 10002-RAA-A03, 10002-RAL-X00, 10002-RAL-A02
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2006-2007 Honda Accord | 2 Door EX, 2 Door EX-L, 2 Door EX-SUL, 2 Door LX, 2 Door LX-SUL, 4 Door EX, 4 Door EX-L, 4 Door LX, 4 Door SE, 4 Door VP | KA 5AT, KA 5MT, KL 5AT
View related parts
Honda Accord Cylinder Block General Assembly
Part Number: 10002-P0A-A02
Product Specifications
- Other Name: Short Block
- Replaces: 10002-P0H-A02
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1996-1997 Honda Accord | 2 Door EX, 4 Door EX, 5 Door EX | KA 4AT, KA 5MT, KL 4AT, KL 5MT
View related parts
Honda Accord General Assembly
Part Number: 10002-RAD-A05
Product Specifications
- Other Name: General Assy.
- Replaces: 10002-RAD-A03
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2006-2007 Honda Accord | 4 Door EX, 4 Door EX-L, 4 Door LX, 4 Door SE, 4 Door VP | KA 5AT, KA 5MT, KL 5AT

| Page 1 of 5 |Next >

1-20 of 82 Results

Honda Accord Engine

Honda Accord Engine provides the power behind converting fuel into forward movement, allowing the sedan to move with reliability and efficiency. Across decades, Honda has improved the Accord powerplant around the internal combustion principle, burning gasoline inside cylinders to push pistons and spin a crankshaft. When wear sets in, owners decide to pick out a replacement rather than scrap the car, and there are two major Engine styles that work for this, the short block and the long block. Both share dimensions, but the short block comes with only core parts such as crankshaft, rods, and pistons, whereas the long block has the cylinder head; hence, they are complete and more expensive. A short block is cost-saving, but you have to reuse a lot of outside pieces, and a long block is faster to bolt in and provides a pre-fitted part. Across generations, Honda kept the Accord lively by matching the Engine choice to drivers, so the choice of the right replacement Engine preserves the mileage and smooth acceleration that define a Honda Accord. Whichever Engine you put in, making the Accord run strong is always the end goal. That fresh Engine will fire up with confidence and give years of dependable travel.

In search of affordable OEM Honda Accord Engine? Consider browsing through our extensive inventory of genuine Honda Accord Engine. Not only do we provide market-leading prices and a manufacturer's warranty, but we also pride ourselves on exceptional customer service and swift delivery.

Honda Accord Engine Parts Questions & Experts Answers

General Assembly
10002-RAD-A05
Q: What preliminary steps should be taken before removing an engine for overhaul or major repair work on Honda Accord?
A:
In case an engine has to be removed for overhaul or major repair work, several precaution should be observed which includes among the following, Carefully study all the removal and installation instructions. The selection of the place is critically important as much space as possible must be provided for the vehicle and storage; if a car shop or a garage is impossible then a flat, clean and level ground made of concrete or asphalt is needed. Setting the tools orderly helps the cleaning of the engine compartment and the engine before starting the removal process; while tightly wrapping water-susceptible parts, a spray cleaner should be applied particularly to the grease-dripping area and then washed off. An engine hoist that has a rating higher than the total weight of the engine and transaxle is required and above all safety is important due to the dangers involved. On models with a V6 power plant, the raising of the power train unit from the engine bay is necessary, for this a vehicle hoist is necessary as the sub frame has to be detached. If one does not have any prior experience doing this, it is recommended to have at least one assisting you because swapping out a heavy engine and transaxle assembly is rather taxing on a single individual. Some of the preparations for the operation that must be made include ensuring that all the tools and equipment to be used are ready, right from the engine stand, the floor jack, the wrenches and sockets, the wooden blocks, and cleaning materials. Furthermore, it is expected that vehicle's availability can be low, that is why consulting a machine shop for the approximate time needed for rebuilding or repairing of necessary parts is advised.