How to check the engine oil level for the 1998 Honda Prelude?

First of all, in the engine compartment find the dipstick and see if there is enough oil. The oil level should fall between the two dots on the dipstick. If it is below the lower dot, add appropriate oil. Always refuel and check for oil with a warm engine and a parked vehicle on level ground. Wait for some minutes to let contribute to the dropping of oil in the pan before continuing examination To change the oil, remove the drain plug and the filter using a 17 mm wrench. When reinstalling, always use a new washer. After removing it, clean up your engine block surfaces and then put back & wipe off drips from plug.

Genuine 1998 Honda Prelude Engine

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Engines found

View related parts
1998 Honda Prelude Cylinder Block General Assembly
Part Number: 10002-P5M-A21
$5001.22 MSRP: $6661.63
You Save: $1660.41 (25%)
ADD TO CART
Product Specifications
- Other Name: General Assy., Cylinder Block
- Replaced by: 10002-P5M-A25
- Item Weight: 154.20 Pounds
- Item Dimensions: 29.1 x 26.4 x 23.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10002-P5M-A21
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
More Info
Fits the following 1998 Honda Prelude Submodels:
- 2 Door Base | KA 4AT, KA 5MT
View related parts
1998 Honda Prelude Cylinder Block General Assembly
Part Number: 10002-P5P-A01
Product Specifications
- Other Name: General Assy., Cylinder Block
- Item Weight: 172.00 Pounds
- Item Dimensions: 29.4 x 26.7 x 22.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10002-P5P-A01
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
More Info
Fits the following 1998 Honda Prelude Submodels:
- 2 Door TYPESH | KA 5MT

1998 Honda Prelude Engine

Our website is the optimal online store for when you need any genuine 1998 Honda Prelude Engine. We offer a wide range of 1998 Honda Prelude Engine at unbeatable prices. We will help provide you with a worry-free shopping experience at highly competitive prices. In addition, all OEM parts are backed by the manufacturer's warranty.

1998 Honda Prelude Engine Parts Questions & Experts Answers

Q: How to check the engine oil level for the 1998 Honda Prelude?
A: First of all, in the engine compartment find the dipstick and see if there is enough oil. The oil level should fall between the two dots on the dipstick. If it is below the lower dot, add appropriate oil. Always refuel and check for oil with a warm engine and a parked vehicle on level ground. Wait for some minutes to let contribute to the dropping of oil in the pan before continuing examination To change the oil, remove the drain plug and the filter using a 17 mm wrench. When reinstalling, always use a new washer. After removing it, clean up your engine block surfaces and then put back & wipe off drips from plug.