How to replace the front Sway Bar Bushing, Sway Bar Kit, and Sway Bar Link on your Honda Ridgeline?

All Honda models and 2006 or earlier Acura models require the following procedures for bushings and links: Before beginning our work, first loosen the wheel nuts, lift up the car's front, and set jack stands under it. When the car is secured, engage the parking brake and block the rear wheels before you start. Disconnect front wheels, push out Sway Bar Bushing retainers bolts, and take off the retainers from the bushings. Separate the Sway Bar Link by both removing the nut that holds them to the strut/coil assembly and the bar, keeping the stud steady with an Allen key in case it turns. Look for damage in the retainer bushings and replace both parts right away. Screw in the new links and really tighten the connecting nuts the right way. Make sure to lubricate and keep clean the spots on the Sway Bar Kit where you're putting new bushings, facing the slits forward when you install them. First, add torque to both retainer and bolt attachments. Next, put on the wheels and their lug nuts, follow by experiencing a safe lowering of the car while tightening each lug nut. To take off the stabilizer bar, engineers need to remove the lower frame while using a jack to support the engine from above. You need to follow safety steps carefully, particularly if there's been an accident and you suspect damages, because other parts might also be damaged. Before putting in a new stabilizer bar, an experienced auto repair shop needs to check the condition of your vehicle.

Genuine Honda Ridgeline Sway Bar Bushing

Stabilizer Sway Bar Bushing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Sway Bar Bushings found

View related parts
Honda Ridgeline Bush, Front Stabilizer Holder
Part Number: 51306-TZ5-A01
$8.13 MSRP: $11.48
You Save: $3.35 (30%)
ADD TO CART
Product Specifications
- Other Name: Stabilizer Bar Bushing; Bushings
- Position: Front
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2017-2026 Honda Ridgeline | 4 Door Black, 4 Door Black Edition, 4 Door Black Edition AWD, 4 Door Black Edition Two-Tone, 4 Door RT (2WD), 4 Door RT (AWD), 4 Door RTL, 4 Door RTL (2WD), 4 Door RTL (AWD), 4 Door RTL AWD, 4 Door RTL-E AWD, 4 Door RTS (2WD), 4 Door RTS (AWD), 4 Door Sport, 4 Door Sport (2WD), 4 Door Sport (AWD), 4 Door Sport AWD, 4 Door TrailSport, 4 Door TrailSport AWD, 4 Door TrailSport With HPD Wheels | 9AT, KA 6AT, KA 9AT
View related parts
Honda Ridgeline Stabilizer Holder Bush
Part Number: 51306-SZA-A02
$6.72 MSRP: $9.57
You Save: $2.85 (30%)
ADD TO CART
Product Specifications
- Other Name: Stabilizer Bar Bushing; Bushings
- Replaces: 51306-SZA-A01
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2009-2014 Honda Ridgeline | 4 Door RT, 4 Door RTL, 4 Door RTS, 4 Door Sport | KA 5AT
View related parts
Honda Ridgeline Stabilizer Holder Bush
Part Number: 51306-S3V-A00
$10.50 MSRP: $14.83
You Save: $4.33 (30%)
ADD TO CART
Product Specifications
- Other Name: Stabilizer Bar Mount Bushing; Bushings, Stabilizer Bar Bushing
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2006-2008 Honda Ridgeline | 4 Door RT, 4 Door RTL, 4 Door RTS, 4 Door RTX | KA 5AT
View related parts
Honda Ridgeline Bush, Rear Stabilizer Holder
Part Number: 52306-SZA-A01
$9.33 MSRP: $13.18
You Save: $3.85 (30%)
ADD TO CART
Product Specifications
- Other Name: Stabilizer Bar Bushing; Bushings
- Position: Rear
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2017-2020 Honda Ridgeline | 4 Door RT (2WD), 4 Door RTL (2WD), 4 Door RTS (2WD), 4 Door Sport (2WD) | KA 6AT, KA 9AT
View related parts
Honda Ridgeline Bush, Rear Stabilizer Holder
Part Number: 52306-SZB-A01
$8.78 MSRP: $12.40
You Save: $3.62 (30%)
ADD TO CART
Product Specifications
- Other Name: Stabilizer Bar Bushing; Bushings
- Position: Rear
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2017-2026 Honda Ridgeline | 4 Door Black, 4 Door Black Edition, 4 Door Black Edition AWD, 4 Door Black Edition Two-Tone, 4 Door RT (AWD), 4 Door RTL, 4 Door RTL (AWD), 4 Door RTL AWD, 4 Door RTL-E AWD, 4 Door RTS (AWD), 4 Door Sport, 4 Door Sport (AWD), 4 Door Sport AWD | 9AT, KA 6AT, KA 9AT
View related parts
Honda Ridgeline Stabilizer Holder Bush
Part Number: 52306-SJC-A01
$4.80 MSRP: $6.78
You Save: $1.98 (30%)
ADD TO CART
Product Specifications
- Other Name: Stabilizer Bar Bushing; Bushings
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2006-2014 Honda Ridgeline | 4 Door RT, 4 Door RTL, 4 Door RTS, 4 Door RTX, 4 Door Sport | KA 5AT
View related parts
Honda Ridgeline BUSH, RR
Part Number: 52306-T6Z-A13
$10.27 MSRP: $14.50
You Save: $4.23 (30%)
ADD TO CART
Product Specifications
- Other Name: Bushings, Stabilizer Bar Bushing
- Replaces: 52306-T6Z-A12
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2024-2026 Honda Ridgeline | 4 Door TrailSport, 4 Door TrailSport AWD, 4 Door TrailSport With HPD Wheels | 9AT

Honda Ridgeline Sway Bar Bushing

In Honda Ridgeline cars, there is a very important component known as the Sway Bar Bushing, which proves quite instrumental in the improvement of the riding quality of the car, as well as vehicle stability. These bushings have the ability to reduce road shocks, minimize noise and shocks and also helps the supporting of the sway bar that helps curving without rolling off the body. On average, every Honda Ridgeline comes with front and rear sway bar bushings so that it can have a nice handling. Eventually, Sway Bar Bushing can degrade and create problems such as reduced or high sensitivity, vibrating, and screeching sounds. If not intervened, such symptoms as imposition of harsh handling and safety risks may worsen further. As for the maintenance of the Sway Bar Bushing, it should be mentioned that the latter must be lubricated periodically to prevent additional load on the Honda Ridgeline and to retain the prescribed driving conditions.

In search of affordable OEM Honda Ridgeline Sway Bar Bushing? Consider browsing through our extensive inventory of genuine Honda Ridgeline Sway Bar Bushing. Not only do we provide market-leading prices and a manufacturer's warranty, but we also pride ourselves on exceptional customer service and swift delivery.

Honda Ridgeline Sway Bar Bushing Parts Questions & Experts Answers

Stabilizer Holder Bush
51306-S3V-A00
Q: How to replace the front Sway Bar Bushing, Sway Bar Kit, and Sway Bar Link on your Honda Ridgeline?
A:
All Honda models and 2006 or earlier Acura models require the following procedures for bushings and links: Before beginning our work, first loosen the wheel nuts, lift up the car's front, and set jack stands under it. When the car is secured, engage the parking brake and block the rear wheels before you start. Disconnect front wheels, push out Sway Bar Bushing retainers bolts, and take off the retainers from the bushings. Separate the Sway Bar Link by both removing the nut that holds them to the strut/coil assembly and the bar, keeping the stud steady with an Allen key in case it turns. Look for damage in the retainer bushings and replace both parts right away. Screw in the new links and really tighten the connecting nuts the right way. Make sure to lubricate and keep clean the spots on the Sway Bar Kit where you're putting new bushings, facing the slits forward when you install them. First, add torque to both retainer and bolt attachments. Next, put on the wheels and their lug nuts, follow by experiencing a safe lowering of the car while tightening each lug nut. To take off the stabilizer bar, engineers need to remove the lower frame while using a jack to support the engine from above. You need to follow safety steps carefully, particularly if there's been an accident and you suspect damages, because other parts might also be damaged. Before putting in a new stabilizer bar, an experienced auto repair shop needs to check the condition of your vehicle.