How to replace the front Sway Bar Bushing, Sway Bar Kit, and Sway Bar Link on your Honda Ridgeline?

All Honda models and 2006 or earlier Acura models require the following procedures for bushings and links: Before beginning our work, first loosen the wheel nuts, lift up the car's front, and set jack stands under it. When the car is secured, engage the parking brake and block the rear wheels before you start. Disconnect front wheels, push out Sway Bar Bushing retainers bolts, and take off the retainers from the bushings. Separate the Sway Bar Link by both removing the nut that holds them to the strut/coil assembly and the bar, keeping the stud steady with an Allen key in case it turns. Look for damage in the retainer bushings and replace both parts right away. Screw in the new links and really tighten the connecting nuts the right way. Make sure to lubricate and keep clean the spots on the Sway Bar Kit where you're putting new bushings, facing the slits forward when you install them. First, add torque to both retainer and bolt attachments. Next, put on the wheels and their lug nuts, follow by experiencing a safe lowering of the car while tightening each lug nut. To take off the stabilizer bar, engineers need to remove the lower frame while using a jack to support the engine from above. You need to follow safety steps carefully, particularly if there's been an accident and you suspect damages, because other parts might also be damaged. Before putting in a new stabilizer bar, an experienced auto repair shop needs to check the condition of your vehicle.

Genuine Honda Ridgeline Sway Bar Link

Stabilizer Sway Bar Link

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Sway Bar Links found

View related parts
Honda Ridgeline Link Assembly, Right Front Stabilizer
Part Number: 51320-TG7-A01
$25.34 MSRP: $36.10
You Save: $10.76 (30%)
ADD TO CART
Product Specifications
- Other Name: Stabilizer Link; Link
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2017-2026 Honda Ridgeline | 4 Door Black, 4 Door Black Edition, 4 Door Black Edition AWD, 4 Door Black Edition Two-Tone, 4 Door RT (2WD), 4 Door RT (AWD), 4 Door RTL, 4 Door RTL (2WD), 4 Door RTL (AWD), 4 Door RTL AWD, 4 Door RTL-E AWD, 4 Door RTS (2WD), 4 Door RTS (AWD), 4 Door Sport, 4 Door Sport (2WD), 4 Door Sport (AWD), 4 Door Sport AWD, 4 Door TrailSport, 4 Door TrailSport AWD, 4 Door TrailSport With HPD Wheels | 9AT, KA 6AT, KA 9AT
View related parts
Honda Ridgeline Link Assembly, Left Front Stabilizer
Part Number: 51325-TG7-A01
$25.56 MSRP: $36.10
You Save: $10.54 (30%)
ADD TO CART
Product Specifications
- Other Name: Stabilizer Link; Link
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2017-2026 Honda Ridgeline | 4 Door Black, 4 Door Black Edition, 4 Door Black Edition AWD, 4 Door Black Edition Two-Tone, 4 Door RT (2WD), 4 Door RT (AWD), 4 Door RTL, 4 Door RTL (2WD), 4 Door RTL (AWD), 4 Door RTL AWD, 4 Door RTL-E AWD, 4 Door RTS (2WD), 4 Door RTS (AWD), 4 Door Sport, 4 Door Sport (2WD), 4 Door Sport (AWD), 4 Door Sport AWD, 4 Door TrailSport, 4 Door TrailSport AWD, 4 Door TrailSport With HPD Wheels | 9AT, KA 6AT, KA 9AT
View related parts
Honda Ridgeline Link Assembly, Front Stabilizer
Part Number: 51320-SJC-A01
$29.51 MSRP: $41.68
You Save: $12.17 (30%)
ADD TO CART
Product Specifications
- Other Name: Stabilizer Link; Link
- Position: Front
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2006-2014 Honda Ridgeline | 4 Door RT, 4 Door RTL, 4 Door RTS, 4 Door RTX, 4 Door Sport | KA 5AT
View related parts
Honda Ridgeline Link, Left Rear Stabilizer
Part Number: 52325-SJC-A03
$29.51 MSRP: $41.68
You Save: $12.17 (30%)
ADD TO CART
Product Specifications
- Other Name: Stabilizer Link; Link
- Position: Driver Side
- Replaces: 52325-SJC-A02
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2006-2014 Honda Ridgeline | 4 Door RT, 4 Door RTL, 4 Door RTS, 4 Door RTX, 4 Door Sport | KA 5AT
View related parts
Honda Ridgeline Link, Right Rear Stabilizer
Part Number: 52320-SJC-A03
$31.93 MSRP: $45.10
You Save: $13.17 (30%)
ADD TO CART
Product Specifications
- Other Name: Stabilizer Link; Link
- Position: Passenger Side
- Replaces: 52320-SJC-A02
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2006-2014 Honda Ridgeline | 4 Door RT, 4 Door RTL, 4 Door RTS, 4 Door RTX, 4 Door Sport | KA 5AT
View related parts
Honda Ridgeline Link, Right Rear Stabilizer
Part Number: 52320-T6Z-A01
$23.85 MSRP: $33.68
You Save: $9.83 (30%)
ADD TO CART
Product Specifications
- Other Name: Link, Stabilizer Link
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2017-2026 Honda Ridgeline | 4 Door Black, 4 Door Black Edition, 4 Door Black Edition AWD, 4 Door Black Edition Two-Tone, 4 Door RT (2WD), 4 Door RT (AWD), 4 Door RTL, 4 Door RTL (2WD), 4 Door RTL (AWD), 4 Door RTL AWD, 4 Door RTL-E AWD, 4 Door RTS (2WD), 4 Door RTS (AWD), 4 Door Sport, 4 Door Sport (2WD), 4 Door Sport (AWD), 4 Door Sport AWD, 4 Door TrailSport, 4 Door TrailSport AWD, 4 Door TrailSport With HPD Wheels | 9AT, KA 6AT, KA 9AT
View related parts
Honda Ridgeline Link, Left Rear Stabilizer
Part Number: 52325-T6Z-A01
$25.48 MSRP: $35.98
You Save: $10.50 (30%)
ADD TO CART
Product Specifications
- Other Name: Link, Stabilizer Link
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2017-2026 Honda Ridgeline | 4 Door Black, 4 Door Black Edition, 4 Door Black Edition AWD, 4 Door Black Edition Two-Tone, 4 Door RT (2WD), 4 Door RT (AWD), 4 Door RTL, 4 Door RTL (2WD), 4 Door RTL (AWD), 4 Door RTL AWD, 4 Door RTL-E AWD, 4 Door RTS (2WD), 4 Door RTS (AWD), 4 Door Sport, 4 Door Sport (2WD), 4 Door Sport (AWD), 4 Door Sport AWD, 4 Door TrailSport, 4 Door TrailSport AWD, 4 Door TrailSport With HPD Wheels | 9AT, KA 6AT, KA 9AT

Honda Ridgeline Sway Bar Link

The Sway Bar Link in Honda Ridgeline vehicles is as important in controlling the cornering body roll by linking the sway bar to the control arm. This link enables the sway bar to offer stiffness to the inside tire and at the same time apply a compounding force on the opposite side hence improving on the car's weight balance and handling. It is in respect to the particular year models of the Honda Ridgeline that Sway Bar Link may have come in different styles though specific styles are unknown. The primary function remains consistent: to ensure mutual engagement of the sway bar and the suspension parts in order to enable efficient transfer of motion, thus enhancing stability and performance of the car. The Sway Bar Link plays an important role especially for stability and smoothness of the driver and passengers with the new Honda Ridgeline especially during high sudden maneuvers.

In search of affordable OEM Honda Ridgeline Sway Bar Link? Consider browsing through our extensive inventory of genuine Honda Ridgeline Sway Bar Link. Not only do we provide market-leading prices and a manufacturer's warranty, but we also pride ourselves on exceptional customer service and swift delivery.

Honda Ridgeline Sway Bar Link Parts Questions & Experts Answers

Link Assembly, Front Stabilizer
51320-SJC-A01
Q: How to replace the front Sway Bar Bushing, Sway Bar Kit, and Sway Bar Link on your Honda Ridgeline?
A:
All Honda models and 2006 or earlier Acura models require the following procedures for bushings and links: Before beginning our work, first loosen the wheel nuts, lift up the car's front, and set jack stands under it. When the car is secured, engage the parking brake and block the rear wheels before you start. Disconnect front wheels, push out Sway Bar Bushing retainers bolts, and take off the retainers from the bushings. Separate the Sway Bar Link by both removing the nut that holds them to the strut/coil assembly and the bar, keeping the stud steady with an Allen key in case it turns. Look for damage in the retainer bushings and replace both parts right away. Screw in the new links and really tighten the connecting nuts the right way. Make sure to lubricate and keep clean the spots on the Sway Bar Kit where you're putting new bushings, facing the slits forward when you install them. First, add torque to both retainer and bolt attachments. Next, put on the wheels and their lug nuts, follow by experiencing a safe lowering of the car while tightening each lug nut. To take off the stabilizer bar, engineers need to remove the lower frame while using a jack to support the engine from above. You need to follow safety steps carefully, particularly if there's been an accident and you suspect damages, because other parts might also be damaged. Before putting in a new stabilizer bar, an experienced auto repair shop needs to check the condition of your vehicle.