×
- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Honda Parts
- Honda Accessories
My Garage
My Account
Cart
Genuine Honda Camshaft
Cam- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
209 Camshafts found
Honda Camshaft Complete, Front
Part Number: 14100-RGW-A02$619.70 MSRP: $894.23You Save: $274.53 (31%)Product Specifications- Other Name: Camshaft
- Position: Front
- Replaces: 14100-RGW-A01, 14100-RGW-A11, 14100-RGW-A10
Honda Camshaft Complete, Rear
Part Number: 14200-RGW-A02$287.04 MSRP: $408.88You Save: $121.84 (30%)Product Specifications- Other Name: Camshaft
- Position: Rear
- Replaces: 14200-RGW-A10, 14200-RGW-A11, 14200-RGW-A01
Product Specifications- Other Name: Camshaft
- Position: Front
- Replaces: 14100-RYP-A00
Product Specifications- Replaces: 14110-5A2-A10, 14110-5A2-A00
Product Specifications- Other Name: Camshaft
- Position: Front
Product Specifications- Replaces: 14110-R44-A00
Product Specifications- Other Name: Camshaft
- Position: Rear
Product Specifications- Other Name: Camshaft
- Replaces: 14120-RAH-H00, 14120-PNA-020, 14120-PPA-000, 14120-PNA-010
Product Specifications- Other Name: Camshaft, Intake; Camshaft
Product Specifications- Replaces: 14120-R44-A00
Product Specifications- Other Name: Camshaft
- Position: Front
Honda Camshaft Complete, Exhaust
Part Number: 14120-5AA-A00$160.22 MSRP: $228.23You Save: $68.01 (30%)Product Specifications- Other Name: Camshaft
Honda Camshaft Complete, Rear
Part Number: 14200-RGL-A00$293.99 MSRP: $418.78You Save: $124.79 (30%)Product Specifications- Other Name: Camshaft
- Position: Rear
- Replaces: 14200-RCA-A00, 14200-RCA-A10
Product Specifications- Other Name: Camshaft
- Position: Rear
Product Specifications- Other Name: Camshaft
- Replaces: 14120-RTA-000
Product Specifications- Other Name: Camshaft
- Position: Front
- Replaced by: 14100-5MR-A00
Product Specifications- Other Name: Camshaft
- Position: Rear
Product Specifications- Other Name: Camshaft
- Position: Front
- Replaces: 14100-5J6-A20, 14100-RLV-A00
Product Specifications- Other Name: Camshaft, Exhaust; Camshaft
Product Specifications- Other Name: Camshaft
- Replaces: 14110-PPA-000, 14110-PNE-000, 14110-RAH-H00, 14110-PNE-010
| Page 1 of 11 |Next >
1-20 of 209 Results
About Honda Camshaft
A Honda Camshaft needs to be kept in good working condition in your vehicle. The online catalog we provide will get you through the ordering process safely and securely. All genuine Honda Camshafts from us are shipped directly from authorized Honda Dealer. If you want search for Honda Camshaft fast and easily, just come to Hondapartsnow.com to look for your parts.
Honda Camshaft Parts Questions & Experts Answers
- Q: How to check camshaft endplay and runout, and How to remove and install a camshaft on 1.8L engine on Honda Civic?A:To check camshaft endplay, with the camshaft installed, reinstall the rocker arm assembly after removing the rocker arms. Mount a dial indicator on the cylinder head with the pointer resting on the camshaft nose, using a large screwdriver as a lever to move the camshaft forward and backward while noting the dial indicator reading. Compare this reading with the specified endplay; if excessive, replace the thrust cover and recheck, as stiffness may indicate wear in the camshaft or cylinder head. For camshaft runout, support the camshaft with V-blocks and set up a dial indicator against the center bearing journal, rotating the camshaft to note the runout and comparing it to specifications; replace the camshaft if the runout exceeds limits. To remove the camshaft, first remove the ignition coils and valve cover, set the engine at TDC for cylinder number one, and remove the timing chain. Unscrew the sprocket bolt while holding the camshaft in place, then remove the camshaft position sensor and thrust cover before sliding the camshaft out. Inspect the camshaft bearing journals and caps for wear, replacing the cylinder head if necessary, and check the cam lobes for scoring and uneven wear, replacing the camshaft if wear is found. Inspect rocker arms for wear and ensure proper lubrication to prevent future issues. For installation, clean all components thoroughly, lubricate the camshaft bearing surfaces and lobes with assembly lubricant, then install the camshaft, thrust cover, position sensor, and sprocket, ensuring proper alignment of marks. Rotate the crankshaft to verify alignment after two complete revolutions, and complete the installation in reverse order of removal.
- Q: How can the extent of cam lobe wear be determined and what are the steps for camshaft removal and installation on 3.1L V6 engine on Honda Passport?A:Before the camshaft can be replaced, one needs to know how worn out the cam lobe is, this is by checking the lobe lift, and the process starts with the stripping off of the valve covers. Place the number one piston at the top of the compression stroke, at the top dead center position. Clamp a dial indicator on the engine and align the plunger of the first rocker arm against the top surface of the pushrod. Rotate the crankshaft back to zero the dial indicator and turn the crankshaft in the normal direction of rotation slowly until the needle of the dial indicator starts to go in the other direction; the position at which it starts to go in the other direction shows the maximum cam lobe lift. Note this figure for later use and align the piston to TDC of the compression stroke. Transfer the dial indicator to the other remaining number one cylinder rocker arm and do the check again and record for each valve. Repeat this kind of procedure for the other valves until all pistons are on the top center of the cylinder on the compression stroke and in compliance with the firing order sequence. When the checks have been done, this should be followed by a comparison with the specifications; if the camshaft lobe lift is below specified levels, this means that cam lobe wear has taken place and this requires that a new camshaft be fitted. For removal there will be necessity of separation of the cable from the negative terminal of battery and then drain the oil. Take out the radiator and if fitted the condenser. Remove valve lifters, timing chain cover, timing chain, camshaft sprocket. Turn the crankshaft to position one of the lobes of the camshaft under the forward bearing journals, then remove two long bolts that are on the end of the camshaft to be used as handle supports in pulling the camshaft out of the block carefully so as not to destroy the bearings. Always smear the lobes and journals of the new camshaft with camshaft installation lube before fitting it into the engine block, this is so as to avoid the bearing being damaged. Replace the camshaft sprocket and the timing chain into its place and fit all the other components in the order of their removal. Lastly, set the tappets clearances and if the car used air conditioning, get it, depressed and refilled.
Related Honda Parts
Honda Cylinder Head Gasket
Honda Spool Valve
Honda Timing Cover
Honda Crankshaft Pulley
Honda Cylinder Head
Honda Rocker Arm
Honda Crankshaft
Honda Cam Gear
Honda Crankshaft Gear
Honda Rocker Shaft Spring Kit
Honda Rocker Guide
Browse by Model
Accord Camshaft Accord Hybrid Camshaft Civic Camshaft Civic Hybrid Camshaft Clarity Plug-In Hybrid Camshaft CR-V Camshaft CR-V Hybrid Camshaft CR-Z Camshaft Crosstour Camshaft CRX Camshaft Del Sol Camshaft Element Camshaft Fit Camshaft HR-V Camshaft Insight Camshaft Odyssey Camshaft Passport Camshaft Pilot Camshaft Prelude Camshaft Ridgeline Camshaft S2000 Camshaft